3/4'' Pneumatic sanitary diaphragm valves
Working temperature: -10℃~+135℃, sterilization temperature 150℃ (MA*20MIN)
Valve body material: product contact parts stainless steel SUS316L, non-contact parts SUS304
Sealing material: The diaphragm adopts imported raw materials, including EPDM and PTFE
Surface polishing accuracy μm: external electromagnetic polishing, internal mirror polishing Ra < 0.4μm
Driving mode: pneumatic
Working pressure: 0-10bar
Connection mode: welding type, quick loading type
Installation Angle: According to the structural characteristics of the valve, it is recommended to install at a 30° Angle, which is conducive to the complete discharge of the valve after cleaning.
It is not easy to cause liquid retention inside the valve.
The sanitary pneumatic diaphragm valve is controlled remotely by the pneumatic device, and there are two kinds of driving methods: normally closed and normally open. It has the advantages of simple structure, beautiful shape, fast disassembly, flexible operation, low fluid resistance, safe and reliable use, etc. Suitable for chemical, petroleum, metallurgy, heating, food, medicine and other industries of water, gas, oil and corrosive media control.
1、the working principle of sanitary pneumatic diaphragm valve:
Sanitary pneumatic diaphragm valves have cylinders for remote control via solenoid valves. The valve stem is used to press the rubber film directly on the seat to shut off or switch on the vacuum system.
2, The advantages of sanitary diaphragm valve:
The diaphragm valve itself is specially designed for ultra-pure media or highly polluted, very viscous liquid, gas, corrosive or inert media. When combined with control equipment, diaphragm valves can replace other traditional control systems, especially for solid and easily contaminated inert media.
3, The use and characteristics of sanitary diaphragm valve:
Sanitary valves are clamped, with simple structure, beautiful appearance, fast assembly and disassembly, quick switching, flexible operation, low fluid resistance, safe and reliable use.
All the steel parts are made of acid-resistant stainless steel material, and the seals are made of food-grade EPDM+PTFE, which meets the food hygiene standards. Widely used in food, wine, beverage, dairy products, fine chemical pharmaceutical and biological engineering and many other industries.