PIR Indoor Night Light Plug-In Motion Sensor LED Power Cut Detection Xtralite

 Xtralite Night Light Torch

Part of the NiteSafe Range

Designed to stay plugged into its induction charging base, which connects directly to a wall socket. The torch should remain in the cradle when not in use and must be returned to recharge.

⚠️ Charge for 24 hours before first use.

Lighting Modes

This model offers:

Motion Sensor Mode

  • Front LEDs activate in darkness when motion is detected

  • Light stays on for approximately 20 ± 5 seconds

  • Brightness: 8 lumens

  • Sensor distance: 3–4 metres

  • Sensor range: 100°

Dual Night Light + Motion Sensor Mode

  • Activated using the button on the back while in the cradle

  • Front LEDs remain on in darkness at a soft glow (0.4 lumens)

  • Brighten when motion is detected

  • Return to soft night light once movement stops

⚠️ The night light and motion sensor features cannot be turned off on this model.

 Automatic Power Cut Function

  • Top LEDs automatically activate if power is no longer detected

  • Also activates if the wall socket is switched off

  • Provides up to 10 hours of light in power failure or torch mode

Power cut detection only works when:

  • The torch is charged

  • Correctly seated in the cradle

  • Plugged in with the wall socket switched on

Handheld Torch Function

Remove from the base at any time for portable use:

  • Top LEDs turn on automatically

  • Press button once → Activate front LEDs

  • Press again → SOS flashing mode

  • Press again → Turn torch off

 Important Information

  • The night light activates automatically whenever ambient light levels drop below natural daylight.

  • This can be triggered by shadows, objects partially covering the unit, or socket location.

  • The torch does not use time-based or smart technology — it operates purely on light levels.

  • There is no manual override for this feature.

  • To minimise daytime activation, plug the torch into a location with consistent natural daylight.

Looking for Power Failure Only?

If you require a model where the night light can be switched off completely, we recommend the Xtralite NiteSafe Maxi. It can be set to “Off” on the unit itself but will still activate automatically during a power cut.