For Briggs Stratton, Homelite, Ryobi -Pressure Washer Chemical Soap Injector Kit



1

Pressure Washer Chemical Soap Injector Kit fits for Briggs & Stratton, Homelite, Ryobi & Husky Replaces 190593GS 190635GS & 203640GS (2 Set)


  • 【Fit on】190593GS Chemical Injector Kit is the replacement soap injector kit for various models pumps manufactured by Briggs and Stratton, fits many other brands with FAIP Pumps and Himore Pumps, such as for Excell DeVilbiss, Troy Bilt, Husky, Campbell Hausfeld, Generac, Coleman Powermate, Ridgid, Task Force, Faip, Homelite, Brute, Duracraft, Simoniz, Simpson, John Deere, etc.
  • 【Function】If the Chemical Injector on your pressure washer is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set.
  • 【Package List】 190593GS chemical injector kit comes with: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings.
  • 【Easy Installation】How to replace: Follow soap hose to end and you'll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don't overtighten, you'll break the o ring or crack white metal on pump.
1

Easy to assemble

2

1

3

3

Step 1

Put on the O-ring outside

Step 2

Put on the O-ring inside

Step 3

Insert the small ball

Step 4

Install the spring
3


















                                        

1

Pressure Washer Chemical Soap Injector Kit fits for Briggs & Stratton, Homelite, Ryobi & Husky Replaces 190593GS 190635GS & 203640GS (2 Set)


  • 【Fit on】190593GS Chemical Injector Kit is the replacement soap injector kit for various models pumps manufactured by Briggs and Stratton, fits many other brands with FAIP Pumps and Himore Pumps, such as for Excell DeVilbiss, Troy Bilt, Husky, Campbell Hausfeld, Generac, Coleman Powermate, Ridgid, Task Force, Faip, Homelite, Brute, Duracraft, Simoniz, Simpson, John Deere, etc.
  • 【Function】If the Chemical Injector on your pressure washer is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set.
  • 【Package List】 190593GS chemical injector kit comes with: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings.
  • 【Easy Installation】How to replace: Follow soap hose to end and you'll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don't overtighten, you'll break the o ring or crack white metal on pump.
1

Easy to assemble

2

1

3

3

Step 1

Put on the O-ring outside

Step 2

Put on the O-ring inside

Step 3

Insert the small ball

Step 4

Install the spring
3