Pls contact us first before you want to return it,thank you!
Fitment system may not be 100% accurate, if you are not sure which bulb size you need, please check vehicle manual or stock bulb model.
Specification:
Plug Type: H7 + H11 + H11 (H11 is the same as H9/H8)
Power(per set): 40W
Luminous Flux: 4000LM
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP65 rated water and dust seal,360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 50000hrs lifetime
Usage: Headlight, Fog Light
Plug Type: H7 + H11 + H11 (H11 is the same as H9/H8)
Power(per set): 40W
Luminous Flux: 4000LM
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP65 rated water and dust seal,360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 50000hrs lifetime
Usage: Headlight, Fog Light
Feature:
Super bright chip,360 degree clear beam no blind zone
Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation
All-in-one heat conduction keep the light bulb in appropriate working temperature
Built-in constant current CPU,instant full brightness without start-up relay
Super bright chip,360 degree clear beam no blind zone
Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation
All-in-one heat conduction keep the light bulb in appropriate working temperature
Built-in constant current CPU,instant full brightness without start-up relay
Package Included:
2x H7 LED Headlight Bulb
2x H11 LED Headlight Bulb
2x H11 LED Fog Light Bulb
2x H7 LED Headlight Bulb
2x H11 LED Headlight Bulb
2x H11 LED Fog Light Bulb
New and old packaging will be shipped randomly
Attention:
CanBus Error Free: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor (NOT included) to avoid hyper flash or fast blinking.Those are NOT problems of LED bulb and NOT covered by warranty. (decoder must be purchased separately)
CanBus Error Free: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor (NOT included) to avoid hyper flash or fast blinking.Those are NOT problems of LED bulb and NOT covered by warranty. (decoder must be purchased separately)
WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.