100pcs Aluminum Solution Welding Flux-Cored Rods Wire Brazing Rod 1.6MM X 50CM
DESCRIPTION


Features:

and
Made of - materials,
Wide range of applications-suitable for welding or surfacing of alloys with high strength, good forgeability and resistance.
- materials-made of aluminum, , odorless, and .
No solder powder-no need to use other flux powder with aluminum alloy as flux and coating as base.
Applications-including welding filler wires and spraying and flame metallization wires. It can also be used for argon welding and filling materials of pure aluminum, and for connection with aluminum bus bars and guide rods in electrolytic aluminum plants, as well as electricity, chemicals, food, .
Perfect welding effect-the design has sufficient and smooth welding effect, because the product has internal powder, excellent weldability and resistance, high thermal conductivity, high electrical conductivity and excellent processing performance.


Product parameters:

Material: Aluminum
Length 50cm / 1.64ft
Diameter: 1.6 mm/0.06 inch


usage:
Clean and polish the physical .
Heat the of the metal material until the temperature of the metal wire reaches the working temperature of 380°C to 400°C.
When repairing thin aluminum, the aluminum-based metal is heated to an appropriate working temperature, and then the metal wire is rubbed and melted to form a weld.
Use propane gas to weld small objects, use industrial gas or induction heating device to heat and weld large objects, and cool down naturally after welding.

note:
The thicker the piece, the more difficult it is to heat up, so it is important to use a reasonable heat source.
As long as the temperature of the base metal reaches the working temperature of the welding wire, welding can be started.
When using acetylene welding, neutral flame welding should be used, but do not directly burn the welding wire.
Applicable heat sources: such as propane, oxyacetylene, .
Storage: Please store in a dry and ventilated place.
The base metal must be clean.
The temperature of the base metal should reach 400 degrees, including the temperature of the base metal during the welding process should be maintained at 400 degrees, the temperature can be high or low.
Professional use is strongly recommended.


The package includes:

100 * Aluminum welding rod


Note:


1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight manual measurement deviation for the data.

POLICES

 

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 



Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.