Spesification:Plug Type: 9005 + H11, High+Low beam
Power: 72W/set (36W/bulb)
LED Quantity(each bulb): 4pcs*
Luminous Flux: 8000lm/set,4000lm/bulb
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP67 rated water and dust seal,360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 50000hrs lifetime
Usage: Headlight,Fog light
(4pcs/set) LED headlight conversion kit
Super bright chip(USA),360 degree clear beam no blind zone
Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation
All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Built-in constant current CPU,instant full brightness without start-up relay
Two-way heat dissipation channel
1.All-in-one aluminum profile with the new honeycomb-structure design using dual ventilate cooling technology, surrounded by high-density cooling fins.
2.With strong built-in high speed mute fan (12000R/Min),high Air flow for faster cooling rate.
Achieve dual ventilation in this comprehensive strengthening design,A large area of holes, leading to the cooling effect without dead angle.
Fog light:
Port Type: H11/H8
Color: white
Voltage: 12V-24V
Power: 40W
Color temperature: 6000K
Luminous flux: 4000LM
Life: 50000 hours
Material: aluminum alloy
Package Included:
2x 9005 LED headlight high beam bulbs
2x H11 LED headlight low beam bulbs
2x H11 LED Fog bulbs
Please note: the old and new boxes will be sent randomly
Install Caution：
1.As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2.Put the vehicle into park or make sure it is securely in gear.
3.Be sure to turn off the ignition and remove the key.
4.Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5.Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6.Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7.Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.