AC-0007

The Craftsman AC-0007 Regulator is a 4 port regulator with the 1/4 inlet and 1/4 outlet ports for airflow.


The AC-0007 also has the ability to capture both tank pressure and line pressure through the two 1/8 inch ports on either side of the regulator.

We show the old style AC-0007 in the listing to help identify your old regulators but there has been a running change and the new Square Body style is what will be sent for all replacement AC-0007 Regulator orders placed after January 1st of 2020.


Service Note:

  1. Remove the Mounting Rind from the Regulator turning the mounting ring counterclockwise until it is removed from the threads of Black the regulator knob.
  2. Turn the Black adjusting knob counterclockwise to expose the flat spots on each side of the regulator mounting threads.
  3. Place the Silver regulator metal body into a vise and secure metal regulator body being careful not to damage any threads of the metal regulator body.
  4. With a 1/18 Smooth wrench locate the flats spots on the regulator mounting thread area of the Black plastic portion of the regulator and turn this portion of the plastic regulator counterclockwise until the Black plastic adjustment body is removed from the Silver metal body.
  5. After the Silver regulator body is in the desired position reassemble the Black plastic position on the regulator back into the Silver body and reassemble all removed components.
Note: No loose parts will be exposed during this process so there is not a risk of anything falling out during this procedure.

Compatible Speedaire Models:

Compatible Craftsman Models:

Compatible DeVilbiss Models:

Compatible Porter Cable Models: