3" 4-Color E-ink Screen for Arduino Raspberry Pi Zero 2 W WH 3 Model B Plus 4

PACKAGE CONTENT:  (  NOT include Raspberry Pi board.)


  1. 3inch e-Paper Module (G) x1    ( NOT Touch Screen ) 

  2. PH2.0 20cm 8Pin x1

1
2

WIKI English manual :     waveshare.com/wiki/3inch_e-Paper_Module_(G)

3″ E-Paper Module (G)

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

 

  • Size3″

  • Resolution400×168

  • Viewing Angle>170°

  • Display ColorRed/Yellow/Black/White

  • Grey Scale2

  •  

  • CommunicationSPI

  • Display PanelE-paper

  • ExperiencePaper-like

  • EnvironmentAmbient Light Required

  • Display TypePassively Reflective

 
 
 
 
 
Features At A Glance

  • No backlight, keeps displaying last content for a long time even when power down

  • Ultra low power consumption, basically power is only required for refreshing

  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.

  • Onboard voltage translator, compatible with 3.3V/5V MCUs

  • Wiki English manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)

Specifications

OPERATING VOLTAGE

3.3V/5V

DISPLAY COLOR

Red/Yellow/Black/White

INTERFACE

3-wire SPI, 4-wire SPI

GREY SCALE

2

OUTLINE DIMENSIONS

88.5 × 41mm

FULL REFRESH TIME

12s

DISPLAY SIZE

70.4 × 29.568mm

REFRESH POWER

<60mW (typ.)

DOT PITCH

0.176 × 0.176mm

STANDBY CURRENT

<0.01uA (almost none)

RESOLUTION

400×168 pixels

VIEWING ANGLE

>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Onboard SPI Control Interface

For Use With Controller Boards Like Raspberry Pi/STM32/Arduino

VCC

Power (3.3V / 5V input)

GND

Ground

DIN

SPI MOSI pin

CLK

SPI SCK pin

CS

SPI chip selection, low active

DC

Data/Command selection (high for data, low for command)

RST

External reset, low active

BUSY

Busy status output pin

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

 
Outline Dimensions
It takes 12-20 working days to arrive most European countries using standard shipping.
Some European island countries, overseas territories and South American countries need to arrive in 25-35 working days.
 
For urgent parcel, you can email us and choose Fedex, DHL, UPS, EMS etc., but you need to pay extra fee.
If you need to use the express delivery service, please contact me via eBay mail.
We absolutely stand behind our products. All of our items will be checked and tested before shipment to ensure 100% performance.
 
We also offer 15 day money back guarantee if you are unsatisfied for any reason whatsoever. We will refund the entire cost of the item not including the shipping and insurance charges. Our aim is 100% customer satisfaction!
 
If you are unclear about product usage, please feel free to contact us. We will offer your detailed instructions for use.
PushAuction