Note :
This package includes 9005 High Beam + H11 Low Beam Headlight Bulbs.
If you are unsure your bulb type, please do remember send message to tell us your car make, model, year and other information which is helpful to check bulb type. for example:
2004 Ford F150, high/low beam
2015 RAM 1500 with projector-type, high beam
Feature:
LED Headlight Bulb Conversion Kit
Combo HB3(9005) High Beam + H11(H8/H9) Low Beam
Ultra-small Ultra-light design, Mini size, the same as the car original light, suit for all models.
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
Built-in constant current CPU, instant full brightness without start-up relay
All-in-one aluminum profile as heat conduction system, 360 degree heat radiating, keep the light bulb in appropriate working temperature
2x Pairs(4pcs)
Specifications:
Input Power:160W 24000LM Total
Voltage: DC12-30V
Lumen : 12000LM/Set
Light Power: 80W/Set
IP Rate: IP68
LED type: CSP CHIPS
Beam Angle: 360°
ColorTemperature: 6000K-6500k White
Heat DissipationTheory: Heat Pipe Technology + A380 Aluminum Heatsink
Operating Life:>100000hrs
OperatingTemperature: -40 - +80°C
Application: Headlamp Lamp High Low Beam
Package Includes:
2 x 9005 High Power LED Headlights Bulbs
2 x H11 High Power LED Headlights Bulbs
This package includes 9005 High Beam + H11 Low Beam Headlight Bulbs.
If you are unsure your bulb type, please do remember send message to tell us your car make, model, year and other information which is helpful to check bulb type. for example:
2004 Ford F150, high/low beam
2015 RAM 1500 with projector-type, high beam
Feature:
LED Headlight Bulb Conversion Kit
Combo HB3(9005) High Beam + H11(H8/H9) Low Beam
Ultra-small Ultra-light design, Mini size, the same as the car original light, suit for all models.
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
Built-in constant current CPU, instant full brightness without start-up relay
All-in-one aluminum profile as heat conduction system, 360 degree heat radiating, keep the light bulb in appropriate working temperature
2x Pairs(4pcs)
Specifications:
Input Power:160W 24000LM Total
Voltage: DC12-30V
Lumen : 12000LM/Set
Light Power: 80W/Set
IP Rate: IP68
LED type: CSP CHIPS
Beam Angle: 360°
ColorTemperature: 6000K-6500k White
Heat DissipationTheory: Heat Pipe Technology + A380 Aluminum Heatsink
Operating Life:>100000hrs
OperatingTemperature: -40 - +80°C
Application: Headlamp Lamp High Low Beam
Package Includes:
2 x 9005 High Power LED Headlights Bulbs
2 x H11 High Power LED Headlights Bulbs
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.