Marine Plywood is suitable for Wet, Moist or Damp Conditions when all sizes are painted or stained with approriate material Marine Ply is avaialbel in thicknesses 6mm, 9mm 12mm, 15mm, 18mm and 25mm

Complies with BS1088 which  is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue.

WBP Glue Line -- BS 1088 plywood must use an adhesive, which has been proven to be highly resistant to weather, micro-organisms, cold and boiling water, steam and dry heat. The product's bonding must pass a series of British Standard tests.

Face Veneers  These must present a solid surface that is free from open defects. Face veneers must be free of knots other than "sound pin" knots, of which there shall be no more than six(6) in any area of one(1) square foot, and there can be no more than an Average of two(2) such knots per square foot area over the entire surface of the plywood sheet. The veneers must be reasonably free from irregular grain. 

Available sizes

305x305mm (12x12 Inch), 610x305mm (2x1 Feet), 910x305mm (3x1 Feet), 1220x305mm (4x1 Feet), 1525x305mm (5x1 Feet), 610x610mm (2x2 Feet), 910x610mm (3x2 Feet), 1220X610mm (4x2 Feet), 1525x610mm (5x2 feet), 2440x610mm (8x2 Feet), 2440x1220mm (8x4 Feet)


Available Thickness
6mm, 9mm, 12mm, 15mm, 18mm, 25mm

Please note - 8x4 Sheets to England Mainland Only - All other Sizes to UK Mainland 


Vat Receipt is available on request