8mm Coil Mounting Bolt Kit Suitable For Minelab Equinox 800-600 / CTX 3030
Item Description
Replacement coil bolt for Equinox 600 and 800 / CTX 3030 or other detectors that use 8mm hole size and less than 50mm in width across the coil mounting lugs.
These coil mounting bolt come with 3D printed thumb screws with easy grip flanged nuts.
Included in the kit is our unique tension adjuster key and coil to shaft alignment tool.
The tensioning key is used to gauge the correct friction to keep your coil aligned without needing to over tighten.
The Coil to Shaft alignment spike is a great asset when attaching the coil to the shaft and getting the holes in the shaft and coil to align when fitting the coil bolt.
Roughly align the holes and then use the alignment side of the tool to to centralise the holes before fitting the bolt.
Great if you suffer from arthritis, have big or muddy hands.
The threaded bolt and nut is made from industrial grade Nylon and not like some sold on eBay 3D printed.
(Does not include any detector coil or coil stiffener that are used for demonstration purposes in images.)
Listed by Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design, eBay Listing Tool (ver:froo_no_js)