NOTE: Please double check local traffic rules before order, ice blue bulbs are illegal to use in some of the US states.
Specifications:
1. Condition: 100% Brand New / Never Used
2. Voltage: DC 9-32V(fit 12V,24V vehicles)
3. IP Rate: IP68
4. LED type:9005 COB LEDs
5. Beam Angle: 360°
6. Color Temperature: 8000K BLUE
7. Heat Dissipation Theory: Heat Pipe Technology
8. Operating Life: >100,000hrs
9. Operating Temperature: -40 - +80°C
10. Application: High/Low Beam Head Lights
11. Number of Bulbs: 2
12. Warranty: 5 Years
13. Placement on Vehicle: Left,Right,Front,unfit 9006 foglight.
This is the new arrival product with beautiful appearance, smaller size for plug and play installation and 360 degrees adjustable mounting collar for better beam pattern.
1. Condition: 100% Brand New / Never Used
2. Voltage: DC 9-32V(fit 12V,24V vehicles)
3. IP Rate: IP68
4. LED type:9005 COB LEDs
5. Beam Angle: 360°
6. Color Temperature: 8000K BLUE
7. Heat Dissipation Theory: Heat Pipe Technology
8. Operating Life: >100,000hrs
9. Operating Temperature: -40 - +80°C
10. Application: High/Low Beam Head Lights
11. Number of Bulbs: 2
12. Warranty: 5 Years
13. Placement on Vehicle: Left,Right,Front,unfit 9006 foglight.
This is the new arrival product with beautiful appearance, smaller size for plug and play installation and 360 degrees adjustable mounting collar for better beam pattern.
Top Features:
360 Degrees Adjustable Beam Pattern
The mounting collar is adjustable for freely rotate, it's softly suitable for different headlight housing with different angles and the light pattern could be easily adjusted, no blinding the upcoming traffic or drivers.
360 Degrees Adjustable Beam Pattern
The mounting collar is adjustable for freely rotate, it's softly suitable for different headlight housing with different angles and the light pattern could be easily adjusted, no blinding the upcoming traffic or drivers.
Quick Installation:
Built with smaller size than the common LEDs in the market without building an external driver, directly plug into the factory housing.
Built with smaller size than the common LEDs in the market without building an external driver, directly plug into the factory housing.
Better Heat Dissipation, Last Longer:
New cooling system with，all-in-one compact aluminum design brings better heat dissipation than common plastic design, and intelligent IC make sure the LED conversion kits last longer.
New cooling system with，all-in-one compact aluminum design brings better heat dissipation than common plastic design, and intelligent IC make sure the LED conversion kits last longer.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Attention:
LED bulb is low power device, the following issues may occur if you want to use LED bulb on some European vehicles: Hyper Flashing, No Flashing, or Error Code. Those are NOT problems of LED bulb and NOT covered by warranty. You may simply add a set of load resistor (NOT included) to avoid those issues.can be solved with a decoder (decoder must be purchased separately)
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Attention:
LED bulb is low power device, the following issues may occur if you want to use LED bulb on some European vehicles: Hyper Flashing, No Flashing, or Error Code. Those are NOT problems of LED bulb and NOT covered by warranty. You may simply add a set of load resistor (NOT included) to avoid those issues.can be solved with a decoder (decoder must be purchased separately)
Tips:
If the product is not suitable or there is a quality problem, please contact our customer service directly to solve the problem. We will give you a satisfactory solution.
If the product is not suitable or there is a quality problem, please contact our customer service directly to solve the problem. We will give you a satisfactory solution.