Dual Microphone KSong Bluetooth Amplifier 30-150W Mono Subwoofer
Amplifier Board
Product description:
Note:
This is just an audio amplifier
accessory, not a finished audio,the microphone version is just a K song
function, does not contain a microphone.
This new product does not take the power
amplifier tube and integrated block, direct digital IC integration, power.
Features:
1. This amplifier board is mono,
mono does not mean that only one speaker can be connected, and multiple
speakers can be connected together (4-8 ohms within 30-150W total power), connected to
the power amplifier board speaker cable! The speaker cable is a plug-in cable.
It is not a soldering wire. It can be ringed when the speaker is connected. If
the speaker has a binding post, please connect it to the terminal with a wire!
(The binding posts are usually behind the speaker - red and black clips)
2. The amplifier board is built-in
Bluetooth (no need for so-called Bluetooth stick, mobile phone Bluetooth
connection can be used, boot default Bluetooth mode), Chinese prompt voice, the
first connection to Bluetooth, the phone volume will automatically adjust to
the factory volume, the phone volume Turn up to be able to note: Bluetooth has
no call function,nbspcan install 6 inch 8
inch 10 inch (cylinder, tunnel, square) subwoofer!
3. Special Note:
The red and white sockets on
this amplifier panel cannot be connected to other amplifiers for amplifier use
(this connection is not feasible) and the satellite box audio head is used. The
red and white sockets are only the audio input, if you have audio Line, then
you can connect to mobile phones, computer hosts, DVDs, car CD players and
navigation devices, you have to switch to the external audio mode by remote
mode!
This amplifier board
is recommended :30-150W 4-8 Ohm speakers and subwoofer!
Suitable for installation:
6-10 inch subwoofer DIY, 6-10 inch speaker. Home floor speaker. Stage sound.
Instructions:
1. Microphone function:
This power amplifier board supports
dual microphones. The microphone can be directly plugged in and used. It can be
sung by K song. When the microphone is used, the microphone is closer to the
mouth, and the microphone volume is much larger. (Note: only has a microphone
function, without microphone )
2. Bluetooth function:
When the power amplifier board is
turned on, it will say Bluetooth mode. At this time, the universal setting of
the mobile phone--Bluetooth--open--connecting signal JY1206B, the connection
signal is successful, you can use Bluetooth!
3. The radio is used
correctly:
The radio is used correctly: the
black thin line on the power amplifier panel is the radio antenna. Hold it
vertically by hand, then press the remote Mode button to switch to the radio
mode, then press the power amplifier board pause/play button to search the
station, red. The indicator light will flash continuously. If there is a
rustling, the radio line of the hand moves to the left or right (stops moving
when you hear someone). Then wait for the red indicator to flash to complete
the search, then fix the line. can! (Note: the size of the station is to see
where it is placed, the general city is better to receive some, township
villages and mountains are less) If you mainly use the radio, please do not
shoot, because the radio is an additional function! ! ! ! !
4. Memory card / U disk:
If you have a memory card, the U
disk will be automatically recognized when plugged into the power amplifier
board!
5. Audio mode:
If you have an audio cable and want
to use the power amplifier board, you need to press the remote Mode button to
turn to the audio mode every time you turn it on!
Package includes:
1PC subwoofer amplifier + 1PCcable +remote
control
