Description:

This LCD Auto Range Intelligent Digital AC/DC clamp multimeter is a portable, 4000 counts multimeter. It is ideally suited for field, laboratory, shop and home applications. The meter can be connected with mobile phone by Bluetooth, and display on phone by APP, you can remote monitoring the measurement condition, the distance control is 10～15m.

Functions  Specifications:

  1. Range Selection: Auto Ranging
  2. Max Display: 4000
  3. Continuity Buzzer
  4. Data Hold 
  5. Diode Test 
  6. Auto power off 
  7. Backlight Display
  8. Overload P rotection 
  9. Phone APP Connection 
  10. Measure DC/AC voltage;AC/DC current,Resistance,Capacitance,Temperature,Frequency,Duty Cycle,Diode Test.

Measurement Possibilities and Measuring Ranges:

DC voltage: 400mV, 4V, 40V, 400V, 1000V, overload protection: 1000V DC or 750V AC rms, impedance: 10mΩ, more than 100MΩ to 400mV

AC voltage: 4V, 40V, 400V, 750V, overload protection: 1000V DC or 750V AC rms, impedance: 10mΩ.Average sensing, calibrated to rms of sine wave.

DC current: 400A, 1000A, overload protection: 1000A rms over 60s.It is recommended to measure the current above 10A.

AC current: 400A ,1000A,overload protection: 1000A rms over 60s, average scanning calibrated to sine wave.It is recommended to measure the current above 10A.

Resistance: 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ,Overload protection: 250V DC/250Vrms AC

Capacity: 4nF,40nF, 400nF, 4μF, 40μF，200μF 

Frequency: 5.12Hz,51.2Hz,512Hz,5.12kHz,51.2kHz,512kHz,5.12MHz

Duty Cycle:: 0.1~99.9%, overload protection 250V DC or AC rms

Diode test: Forward DC current approx. 0.4mA .Reversed DC voltage approx. 1.5V.

Continuity test: acoustic <100Ω

Temperature: -20 to 1000°C. Temperature sensor supplied: -5 to 250°C

 

Technical Data:

 

Display: Display: 4000 counts digit LCD with a max. reading of 4000 monitor with character 18mm high. LCD size: 51.3×24.5mm, with backlight

Safety: The meter is up to the standards of IEC1010 Double Insulation,Pollution Degree 2, Overvoltage Category Ⅱ.

Pliers opening: 45mm

Power supply: 9V battery

Operating environment: 0-40°C, relative humidity <80%rH

Storage environment: -20-60°C, relative humidity <90%rH

Accuracy environment: 23±5℃, relative humidity ≤70%RH

Dimensions (WxHxL): 225(H)×77(W)×45(D)mm

Weight: 350g incl. Battery

The pliers multimeter measures temperatures from -20° to 1000°C. The supplied temperature sensor is suitable for measurements from -5° to 250°C.

 


 Package
1*HP-570T-APP Clamp Meter
1*User Manual
1*Test lead
1*Carrying Bag

PushAuction