It is specifically formulated to eliminate tobacco and cannabis smoke odor from furniture, carpet, walls, and upholstery.

SPRAYER APPLICATION


Add 2-4 oz. of concentrate to 1 gallon of water. Apply directly to surfaces affected by tobacco and cannabis smoke. It is essential to ensure that ODORCIDE® Smoke Brake® reaches the odor source at a concentration equal to or greater than the source. Absorbent cloth materials must be saturated to ensure the solution reaches the malodor. Allow the items to air dry (fans or dryers can accelerate the process). Repeat, if necessary, to get the odor source effectively in all areas.

FOGGER SYSTEMS


Remove all unattached items, such as drapes, rugs, furniture, etc., from the affected area and treat with ODORCIDE® Smoke Brake® according to the directions below. Close all windows and doors, cover any sensitive items that can’t be removed, and turn on the central heating/air conditioning system. Dilute the product per the instructions and add it to the fogger, carefully following the directions supplied with the unit. Ensure all people and pets are out of the area.

Recommended Settings:

  • Small Rooms – low setting
  • Large Rooms – low or medium setting with fans
  • Large Rooms – high setting if not using fans

Fans help force ODORCIDE® Smoke Brake® into cracks and crevices where the odor source may be difficult to treat. The length of time fogging depends on the smoke's severity and the affected area's size. The concentration can also be varied depending on the severity of the odor.

VEHICLES


Dilute 2-4 oz. Per gallon of water into a trigger sprayer. Lightly spray onto the vehicle's interior surfaces and into the exhaust ports/vents of the heating/air conditioning system. Allow to air dry, and use fans if possible. Repeat, if necessary, to eliminate any remaining odor. As with other applications, ODORCIDE® Smoke Brake® must reach the odor source at a concentration equal to or greater than the smoke odor source.