11oz Coffee Mug Sublimation Heat Press Transfer Machine Digital for Cup Printer
Specification:
Product Name: Pro mug press machine
Rated Voltage: 110V / 220V
Rated Power: 280W
Hightest Temperature: 210℃ / 410℉
Time Range: 1-999s
Transfer Specifimations: 11oz
Length of the cable: 1.5M
Machine Size: 320*280*240mm
Operation Steps:
1. Set the temperature, such as ceramic mug 180 degrees, 180 seconds
2. After the temperature reaches 180 degrees, put the mug with the sublimation paper in the machine, press down the handle, and use moderate force
3. The machine will count down automatically after the handle is pressed down, and the mug can be taken out after the countdown is completed.
Details:
1. Handle: put pressure on
2. Adjusting lever
3. Guide rod
4. Display screen
5. Button
6. Power socket
7. Overload protector
8. Power switch
9. Aviation connector
10. Heating pad
Adjusting rod: adjust the pressure of the heater according to the mug specifications.
Guide rod: to ensure that the pressure at both ends of the mug heatre is balanced.
Common problem:
E1/E2: E1/E2 appearing on the display means that there is a short circuit/open circuit in the temperature probe wire(that is, the wire is broken and connected to cause a short circuit, and the open circuit means that the wire is broken or the plug wire falls off). Check the aviation connector to fht mug heater.
1. Before working, you need to prepare the correct materials: sublimation mugs, sublimation papre, etc.
2. The pattern turns yellow/brown: reduce the temperature or reduce the time.
3. The color of the pattern in light/white: it is necessary to increase the temperature or add time.
4. Mug heater bubbles: need to be replaced with new ones.
5. Temperature not rise: Check whether the heater wiring and the controller are plugged in tightly
Electrical schematic diagram:
