Druckbecherpistole TBS 222 + Fluid Film Liquid A 5 L Korrosionsschutz + Folie
Artikel-Nummer: 1931344- Druckbecherpistole TBS 222 G2
- Fluid Film Liquid A, 5 Liter
- Abdeckplane 4 x 5 m
Sie haben fragen? Kontaktieren Sie uns
| Aufgetragen durch: |
Anzahl der Schichten |
Schichtdicke in μm (ca.) |
Verbrauch l/m² |
Ergiebigkeit l/m² |
Düsen |
|---|---|---|---|---|---|
| Fluten | 1 | 500 - 1500 | 0,5 - 1,5 | 2 - 0,7 | - |
| Pinsel | 1 | 80* | 0,08* | 12 | - |
| Rolle | 1 | 80* | 0,08* | 12 | - |
| Druckluftpistole | 1 | 170* | 0,17* | 6 | 0,8 mm 5-6 bar |
| Airless | 1 | 170* | 0,17* | 6 | 0,63 mm 150 bar |
Do you have questions? Contact us
To improve the penetration into the seams and corners, heating in a spray booth ore with a hot air pistol is possible, although when applied, in the summer months this is not necessary. As a precautionary measure it is recommended to cover the vehicles with a plastic foil and to place newspapers underneath the water draining holes in the bodywork. Grease that drops out of the vehicle during treatment can be re-heated and used again. This product is especially effective when used under screws, chrome strips and light fittings. Nuts and bolts that have been treated will undo easily even after years of neglect. An examination of the vehicle in respect of corrosion and if necessary an additional treatment is recommended every 2-4 years.
FLUID FILM Liquid A is an oily amber transparent liquid. It is a lanolin-based coating, solvent free, non-toxic and will not evaporate. Fluid Film Liquid A reacts with moisture to form a soft gelatinous barrier. This mixture is chemically combined and thus unavailable to cause corrosion.