








Features:
Spec:
Using the same high resolution Sony CCD based HQ5 Bullet camera but with tweaked lens filters to enhance colour and sharpness all round.
The MiniDVR 3 is the 3rd generation of bullet cameras from this range and uses the very latest Zorro 9 chipset for encoding. This gives a higher bitrate up to 13mb/s resulting in better video quality than ever before. We reckon the video quality is around 25% better than the previous h720 model.
Just 19mm in diameter and 55mm long.
As with the previous model you still get the "LANC" remote controller which plugs in to the recorder part. You can turn the unit on/off and start/stop recording with the remote either on your wrist or hanging from a jacket pocket. This means you can keep the recorder part tucked safely out of the way.
2 x 1400mAh rechargeable batteries with each system which will give you at least 2 hours record time each.
You get an external battery charger that allows you to charge both batteries at the same time.
The cigarette lighter adapter that can be used to either charge the batteries in the recorder or to power it permanently. The system can be put in "CAR MODE" which detects when you have powered up the recorder from your vehicle. At this point it will turn on and start recording automatically.



MICRO DVR KIT, CLIP ON MIC & HEAVY DUTY 6FT EXTENDER CABLE ASSURE STABILITY & PERFORMANCE.






The back reveals the built in mic and battery compartment.



MILITARY GRADE WATERPROOF HARD CASE OTTER BOX WITH PICKING FOAM SO YOU CAN CUSTOM FIT ELECTRONIC GEAR & CAMERAS INSIDE IT TO YOUR NEEDS.Features:



1- Soft Mount Headband/ REMOVABLE loupe mount Velcro Nylon Sleeve Holster 





1-Mini Soft Mount Quick Clip Locking Position Adhesive Grip Holder adheres to any flat surface quickly & also with a very secure hold/grip.


1-BLACK Hard Mount TEMPERED PLASTIC "WONT BREAK" THE PERFECT PINCH ANACONDA TYPE DEATH GRIP PUSH INSERT SNAP CLAMP TUBE CAM HOLDER IN THE WHOLE WORLD" + nut/bolt will mount to your hat (top or bottom)Helmet Fin/Side, For the best hold you will EVER FIND!

we stock 3 sizes also.

1 & 3/4 INCH tall HARD MOUNT Omni pan tilt swivel mount base with screws, or you can use reclosable tape/velcro for the bottom round base & mount to any flat surface & will allow adjustable pan/tilt view in seconds, the securely lock down the wing nut.
NOTE: THE PINCH u SNAP CLIP WILL THREAD ON TO THIS OMNI PAN TILT MOUNT ALLOWING TOP OR BOTTOM MOUNTING OF THE BULLET CAM.
2 Zip Tie adhesive Flat Bottom FRONT/BACK mounts for anywhere quick mounting.
1-Removable Polarized Filter Neutral Density DISK INSERT. Acts like sunglasses for the camera on those real bright sunny days or from water/reflection glare.