2 (ONE PAIR) - STEAM BENT RED OAK ROCKER RUNNERS

Steam bending produces a much stronger rocker runner than those cut from flat stock. Made of unfinished solid red oak. Slightly Sanded, Unfinished and Not Drilled. You drill it to your exact specifications. These are raw, oak wood that is not treated. (Make sure you treat and prime these before painting or use a good sealant, otherwise the humidity and weather could swell them up and ruin them.)

The radius is measured along the bottom of the runner following the curve from end to end. The length is measured across the runner from tip to tip at the longest point. Measurements will vary slightly from batch to batch.

Overall: 1-1/4" High (Tall) -- by -- 1-3/4" Wide --- by --- 34-1/4" Long (Length measurement taken straight across from tip to tip.)

36" Radius/Arc Bend -- 3.5" from the ends to the floor rise distance

Sold as a Pair Only (two rocker runners)

PLEASE NOTE: Length Measurements of ALL Rocker Runners are approximate as they vary from shipment to shipment. and because wood is a natural material, wood grain patterns, knots and other unique characteristics will be different than what is shown on the pictures, some might have flaws, chips etc which add characteristics. Also these are steam bent and humidity, temps via shipping trucks etc might tweak or change the bend a little bit. You will probably need to true them up yourself to get them exactly perfect.

*A 20% restocking fee will apply on all returned Rocker Runners

*We will default to the cheapest shipping, USPS, FedEx or UPS Ground - please specify if we need to ship it another way or if you do not have a physical drop off at your location etc.

W3-5240