TEKSHIELD GRP ROOFING KIT 36m² 450G

Product overview

TEKSHIELD GRP ROOFING KIT 36m² 450G brings together the listed materials for the selected 36m² system specification. Check the product contents and installation requirements below before ordering.

TekShield GRP roofing materials selected for approximately 36m² of new roof installation, with resin, fibreglass reinforcement, topcoat and the listed accessories in practical pack sizes.

Best suited to

A new, suitable GRP roof deck where the selected reinforcement grade and system finish meet the project specification.

System specification

450G reinforcement · OSB3 tongue-and-groove deck · standard system · acetone included.

Why choose this kit?

• Roofing resin, reinforcement and matching finishing materials brought together in one order
• Pack sizes selected for the stated roof area and reinforcement specification
• Exact included products and quantities listed below
• Compatible catalyst and detailing accessories included where shown in the contents

What is included

• 2 × TekShield GRP Roofing Resin - 20kg
• 1 × TekShield GRP Roofing Resin - 5kg
• 1 × TekShield / TekGuard 450g Chopped Strand Matting for GRP Roofing - 8.25kg quarter roll
• 1 × TekShield / TekGuard 450g Chopped Strand Matting for GRP Roofing - 5kg / 11m x 1m
• 1 × TekShield / TekGuard 450g Chopped Strand Matting for GRP Roofing - 3kg / 6.6m x 1m
• 1 × TekShield Standard GRP Roofing Topcoat - RAL 7011 Grey - 20kg
• 1 × TekShield Standard GRP Roofing Topcoat - RAL 7011 Grey - 10kg
• 2 × TekShield / TekGuard Standard MEKP Catalyst for GRP Roofing - 1kg
• 1 × 30ml PP Measuring Cup
• 1 × TekShield / TekGuard Woven Fibreglass Joint Tape - 75mm x 50m
• 1 × TekShield Virgin Acetone Cleaner for GRP Roofing - 1L

What each component does

• Roofing resin: Wets out and bonds the fibreglass reinforcement to form the GRP laminate.
• 450g reinforcement: Provides the 450g fibreglass reinforcement within the roof laminate.
• Standard GRP topcoat: Provides the protective finishing layer over the cured GRP laminate.
• Standard catalyst / hardener: Used at the technical-data-sheet mixing rate to initiate curing of the compatible GRP resin or topcoat.
• Catalyst Dispenser: Helps measure the catalyst quantity accurately.
• TekShield woven joint / trim tape: Reinforces joints, corners and details as specified in the installation guidance.
• Acetone / cleaner: For cleaning suitable tools where permitted by the product guidance.

Coverage and preparation

Kit quantities are selected for the stated 36m² project area and the chosen specification. Sealed pack sizes may provide a small surplus. Coverage depends on substrate condition, preparation and application; verify your measurements and the relevant technical data before use.

Before you start

Confirm the measured roof area, deck condition and perimeter/detail requirements before ordering. This m² kit deliberately does not invent edge-trim quantities from a fictional roof shape. Follow the current TekShield product labels, TDS/SDS and installation guidance for preparation, catalyst addition, temperature limits, application and curing.

What is not included: Products and tools not explicitly listed above are not supplied. Check trims, preparation materials, protective equipment and delivery requirements for your project.

Product details

Exact kit contents

• 2 x TekShield GRP Roofing Resin - 20kg
• 1 x TekShield GRP Roofing Resin - 5kg
• 1 x TekShield / TekGuard 450g Chopped Strand Matting for GRP Roofing - 8.25kg quarter roll
• 1 x TekShield / TekGuard 450g Chopped Strand Matting for GRP Roofing - 5kg / 11m x 1m
• 1 x TekShield / TekGuard 450g Chopped Strand Matting for GRP Roofing - 3kg / 6.6m x 1m
• 1 x TekShield Standard GRP Roofing Topcoat - RAL 7011 Grey - 20kg
• 1 x TekShield Standard GRP Roofing Topcoat - RAL 7011 Grey - 10kg
• 2 x TekShield / TekGuard Standard MEKP Catalyst for GRP Roofing - 1kg
• 1 x 30ml PP Measuring Cup
• 1 x TekShield / TekGuard Woven Fibreglass Joint Tape - 75mm x 50m
• 1 x TekShield Virgin Acetone Cleaner for GRP Roofing - 1L