Tordale
Turn the Top of Your Fridge Into a Shelf
Telescoping steel rack, 17″ to 31.5″ wide. L-slot feet hook over the appliance edge — no drilling, no adhesive, no marks left behind. Rated 50 lbs.
17″–31.5″Adjustable width 50 lbLoad rating 0 toolsAssembly
Will it fit your appliance?
Measure the flat top surface, then match it to the table below. The rack covers 17″ to 31.5″.
Appliance Typical top width How to set it Fits
Compact / Apartment Fridge17" – 24"Set the rack near its narrowest✓
Standard Top-Freezer Fridge28" – 30"Mid range✓
French Door / Side-by-Side30" – 36"Set near full extension✓
Washer or Dryer (front load)27"Typical US front-load width✓
Stacked Washer / Dryer27"Fits the top of the stack✓
Commercial / Oversize Unitover 36"Not covered — check before buying✗
Measure before you order
The rack sits on a flat, level top. Curved or rounded appliance tops, and tops with a raised back lip or control panel, will not seat the L-slot feet correctly. If your appliance top is over 36″ wide, this rack is not the right size.
Why this one holds without screws
Most over-appliance racks either drill into the cabinet or rely on adhesive pads. This one uses neither.
1One Rack, 17" to 31.5"
The frame slides wider or narrower on a telescoping rail, so the same rack fits a compact apartment fridge, a full-size French door refrigerator, and a standard washer or dryer. Measure the width of your appliance top once, set the rack, and it stays where you put it.
2L-Slot Feet, No Drilling, No Marks
The legs end in an L-shaped slot that hooks over the appliance edge instead of pressing a screw or adhesive pad into the cabinet. Nothing is drilled, nothing is glued, and the painted top surface of your fridge or washer comes away unmarked when you move out.
3Holds 50 lbs Evenly
A folded steel frame with a powder-coated finish carries up to 50 lbs when the load is spread across the shelf. That covers a microwave, an air fryer, a rice cooker, detergent jugs, or a row of canisters.
4Up in Under a Minute
No tools. Pull the two halves apart to the width you need, seat the L-slots on the appliance edge, and set the shelf panel down. Disassembly is just as quick, which matters in rentals and dorms.
5Works Wherever a Machine Eats Your Counter
Kitchen counter space above the fridge, the dead zone over a washer and dryer, a dorm mini-fridge, or a garage utility sink. Anywhere a flat top is going unused, this turns it into a shelf.
Specifications
Adjustable Width17 in – 31.5 in
Overall Depth13.6 in
Overall Height11.2 in
Load Capacity50 lb (evenly distributed)
Number of Shelves1
MaterialPowder-coated steel
ColorWhite
AssemblyNo tools required
Net Weight8 lb
Package IncludesStorage rack, user manual
Where people put it
Above the fridge
Microwave, air fryer, cereal boxes, spice jars — the space that was too tall to use.
Over the washer
Detergent jugs, dryer sheets, a laundry basket — off the floor and out of the way.
Dorm & garage
Mini-fridge in a dorm, or a utility sink in the garage. Same rack, no installation.
In the box
• 1 × expandable storage rack (two telescoping frame halves + shelf panel)
• 1 × user manual
A note on load
50 lbs is the rating for a load spread across the whole shelf. A single heavy item concentrated in the middle of the span will flex the panel. Keep dense items toward the ends where the frame is supported, and do not stack more than one row of heavy appliances.
Tordale — Adjustable Refrigerator Top Rack. Model D7N-S5G-J8H. Fits appliances 17″–31.5″ wide with a flat top. Rated 50 lbs evenly distributed.