C Shaped End Table, C Table with Wheels, TV Tray Table
Application
This product works ideally near sofas, beds, TV stands, or beside. It is ideal for use in the living room, bedroom, or home office.

Specifications
Color: Light Walnut Color
Material: Solid Rubber Wood
Number of Wheels: 4(2 with Brakes)
Mount Type: Free Standing
Assembly Required: Yes
Product Size: 40*46*63cm/15.75*18.11*24.8in

Package Included
1* Upper Tabletop
1* Lower Tabletop
2* Brackets
10* 3.5cm/1.38in Spike Screws
16* Mini Self-Tapping Screws
2* Lockable Casters
2* Casters without Locks
1* Wrench
1* Screwdriver
1* English Instruction Manual

Key Features
Easy Mobility: Equipped with smooth-rolling swivel casters at the bottom. The product glides simply across different floor types. Two of the casters feature a click-lock mechanism, allowing you to securely lock the product in place when needed. This makes the product both easy to maneuver and stable when stationary.

Stylish Appearance: The natural wood grain beautifully highlight the product's surface. The surface features smooth, flowing curves and a silky feel to the touch. The clean, minimalist design complements a wide range of home décor styles.

Easy to Clean: The flat, smooth tabletop stands up to dust and spills. A quick wipe with a damp cloth is what it takes to keep the product looking fresh and clean.

Efficient Space Use: Two tiers double the storage without increasing the footprint. Top tier for daily essentials, bottom tier for extra items, making them neatly organized and easily accessible.

Pre-drilled Holes: Screw holes are pre-drilled with precision alignment, making assembly quick and simple without the need for guesswork or measuring.

C-shaped Design: The smart C-shaped profile allows the tabletop to slide easily under sofas, armchairs, or bed frames, bringing the surface directly within reach without having to lean or stretch.

Notes
1. Please check the size carefully before ordering.
2. Please check the parts list and verify that all components, screws, and accessories are complete. Then follow the steps below for assembly. Step 1: Overall assembly. Please take out the left and right brackets. Place the tabletop upside down, position the left and right brackets onto the tabletop, and insert the screws from the wider side of the holes. Step 2: Attach the base plate. Please place the base plate onto the left and right brackets with the pinhole marks facing upward, confirming the smaller holes are toward the rear. Step 3: Install the casters. Please insert two locking casters and two casters without locks into the reserved holes on the base plate. Then please secure each caster using the smallest self-tapping screws(4 screws per caster). Insert screws through the wheel axle and bracket, then tighten. Step 4: Place the product upright. Please turn the product upright. Please gently lift each corner of the tabletop to check for unusual noises or wobbling. Then push the table to confirm the casters roll smoothly.
3. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and confirm you don't mind before ordering.