Configuration Options:
* Digital Timer – 0.01% Accuracy
* Pulse Speed Tester – 0.01% Accuracy
* High-Precision Timer – 2 ppm Accuracy
Features:* Model: MTTU2-6E1R-M485 Microsecond Timer with RS485 Communication Interface
* Relay Alarm Output: 1 relay output for alarm control
* Display: Single-row digital LED display for clear, easy-to-read measurements
* Auxiliary Power Supply: Built-in 12V DC output for powering sensors
* Precise Microsecond Timing: Designed for accurately measuring microsecond-level pulse widths and time intervals
* Stable and Reliable Performance: Excellent resistance to electrical interference and vibration for dependable operation
* Communication Interfaces: Supports RS485/RS232 interfaces
* Communication Protocol: Modbus protocol
* Baud Rate: 9600bit/s (default)
* Multiple Timing Applications: Suitable for single-pulse timing and dual-pulse interval measurement
Technical Specifications:
* Relay Alarm Output: One relay output
* Timing Range: 0-999999 units
* Time Units: 0.1µs, 1µs, 10µs, 100µs, 1ms
* Accuracy: Maximum resolution of 1µs; minimum measurable time interval ≥ 5µs
* Input Signal Voltage: Low level ≤ 2V; high level ≥ 6V
* Input Impedance: ≥ 4.7kΩ
Three Timing Modes:
1. CP1 Falling Edge to CP2 Falling Edge: Timing starts at the falling edge of the CP1 input signal and stops at the falling edge of the CP2 input signal. The instrument records the time interval between the two falling edges.
2. CP1 Pulse Width Measurement: Timing starts at the falling edge of the CP1 input signal and stops at its rising edge. The instrument measures the pulse width of CP1. The CP2 input is not used in this mode.
3. CP1 Pulse Interval Measurement: Timing starts at the falling edge of the first CP1 input pulse and stops at the falling edge of the second CP1 input pulse. The instrument records the time interval between two CP1 pulses. Three consecutive pulses on CP1 are not permitted. The CP2 input is not used in this mode.
Two Display Modes:
1. Elapsed Time Display: Displays the measured time interval.
2. Reciprocal Time Display: Displays the reciprocal of the measured time interval, representing the instantaneous speed value.
General Specifications:
* Reset Input: Level-triggered reset; a pulse width of ≥ 20ms triggers a reset.
* Power Supply: AC/DC 100-250V
* Auxiliary Output Power Supply: DC 12V, 200mA (for sensor power supply)
* Power Consumption: Less than 4W
* Relay Contact Rating: AC 220V, 3A; DC 24V, 5A
* Operating Environment: Temperature: 0 to 60°C; relative humidity: ≤ 85%
* Storage Temperature: -20 to 85°C
* Mounting Type: Panel snap-in mounting
* Dimensions: 72 x 72 x 105mm
* Weight: 230g
Communication Interface:
* Communication: RS485/RS232 interface, supporting the Modbus protocol
* Baud Rate: 9600bit/s (default)
Packing List:
* 1 x Digital Timer
Packaging Details:
* Package weight: 0.3kg
Note:
* For reliable communication, a three-wire connection is recommended. In addition to the two communication lines, A (D+) and B (D-), an extra 0V reference wire should be connected between the tester's 0V terminal and the communication interface's 0V (GND) terminal. This connection helps prevent damage to the communication chip caused by voltage differences between the tester and the communication interface. It also helps reduce electrical interference and improve communication stability.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.