Part Number:
4260702100,4260712040,4260706090,4260753020,4260702050,4260702100,SU00309715
Frequency: 315Mhz
Package Include:
4 x TPMS(Tire Pressure Monitoring Sensor)
Information：
a)Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. it will work and fit.Thank you!
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.For example:
For 2004 Ford F 150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F 150 ,XL Crew Cab Pickup 4-Door 2.7L
a)Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. it will work and fit.Thank you!
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.For example:
For 2004 Ford F 150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F 150 ,XL Crew Cab Pickup 4-Door 2.7L
Application:
FOR LEXUS ES300H 2020-2021
FOR LEXUS ES350 2020-2022
FOR LEXUS IS350 2021-2022
FOR LEXUS LC500 2020
FOR LEXUS LC500H 2020
FOR LEXUS LX570 2021
FOR LEXUS RC F 2020
FOR LEXUS RC350 2020
FOR LEXUS RX350 2020-2022
FOR LEXUS RX450H 2020-2021
FOR TOYOTA 4RUNNER 2021
FOR TOYOTA CAMRY 2020-2022
FOR TOYOTA COROLLA 2020-2022
FOR TOYOTA MIRAI 2021
FOR LEXUS ES300H 2020-2021
FOR LEXUS ES350 2020-2022
FOR LEXUS IS350 2021-2022
FOR LEXUS LC500 2020
FOR LEXUS LC500H 2020
FOR LEXUS LX570 2021
FOR LEXUS RC F 2020
FOR LEXUS RC350 2020
FOR LEXUS RX350 2020-2022
FOR LEXUS RX450H 2020-2021
FOR TOYOTA 4RUNNER 2021
FOR TOYOTA CAMRY 2020-2022
FOR TOYOTA COROLLA 2020-2022
FOR TOYOTA MIRAI 2021
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.