🔋 5870mAh High Capacity for DJI Phantom 4 Series Flight Battery & Charging Hub

5870mAh Li-Po · 15.2V · 89.2Wh · 3-Bay Sequential Charging Hub · for Phantom 4 / Pro / Advanced / RTK

✅ Compatible Product

DJI Phantom 4 Series: Phantom 4 (original), Phantom 4 Pro, Phantom 4 Pro V2.0, Phantom 4 Advanced, Phantom 4 RTK ✅

Charging Hub: Charges up to 3× Phantom 4 series intelligent flight batteries sequentially; compatible with original PH4 charger / power adapter (17.4V max input) ✅

Chargers: Works with original DJI Phantom 4 charger and PH4 Battery Hub ✅

❌ NOT Compatible: Phantom 3, Mavic, Inspire, Mini, Air series — battery is ONLY for Phantom 4 family.

📦 Package Contents

Shipment will be based on your selected option.

Note:Only the battery / Charging Hub.
Power charger（adapter）is NOT included. A separate power charger（adapter）is required for use.

🔍 Product Overview

This 5870mAh High Capacity Intelligent Flight Battery is a replacement smart battery designed for the entire DJI Phantom 4 series — including Phantom 4, 4 Pro, 4 Pro V2.0, 4 Advanced, and 4 RTK. With a Li-Po 4S configuration (15.2V nominal, 17.4V max charge, 89.2Wh), it delivers extended flight time over standard third-party cells. The built-in smart BMS chip monitors real-time voltage, remaining capacity, and cell balance, self-checks before takeoff, and reports data to the DJI GO / GS RTK app. Multiple protections include over-charge, over-discharge, over-current, short-circuit, and over-temperature safeguards. The companion PH4 Battery Hub supports 3-bay sequential charging — insert up to 3 batteries and the hub auto-detects and charges them one by one, with LED status indicators (checking / charging / standby / full). Both battery and hub are plug-and-play with original DJI charging equipment, making them essential for aerial photography, surveying, and outdoor flight operations.

✨ Key Features

🔋 5870mAh High Capacity: Extended airtime vs. standard aftermarket cells — more flight minutes for aerial shooting and mapping missions.

🚁 Full P4 Series Compatibility: Fits Phantom 4 / 4 Pro / 4 Pro V2.0 / 4 Advanced / 4 RTK — direct OEM replacement, no modification needed.

🧠 Smart BMS Protection: Built-in management chip with real-time capacity monitoring, over-charge/discharge/over-current/short-circuit/over-temp protection; pre-flight self-check; voltage/capacity telemetry to app.

⚡ High-Rate Discharge Cells: Stable power output for takeoff, hover, and landing — consistent flight dynamics.

🔄 Smart Cell Balancing: Auto cell-balancing extends cycle life and maintains pack health.

🔌 Original Charger Compatible: Works with DJI original charger and PH4 Battery Hub — no need to replace charging equipment.

🔁 3-Bay Sequential Hub: Charge up to 3 batteries in rotation; auto-detection and LED status feedback (checking/charging/standby/full).

💡 LED Indicators: Checking (blink) → Charging (blink) → Standby (red solid) → Full/Empty (green solid).

⚙️ Technical Specifications

💡 Usage Tips

First-use activation: Fully charge and discharge 1–2 cycles to condition the cells for optimal performance.

Pre-flight check: Always inspect battery shell for swelling or damage — DO NOT fly if battery is puffed or cracked.

App telemetry: After insertion, check battery status in DJI GO / GS RTK app — confirm cell voltages are balanced before takeoff.

Hub charging: Connect original PH4 power adapter to hub, insert up to 3 batteries, hub auto-detects and charges sequentially — no manual switching needed.

Storage: Li-Po batteries should NOT be stored fully charged long-term; keep at 40–60% for extended storage. Charge to full only before flying.

⚠️ Important Notes

Phantom 4 series ONLY — NOT for Phantom 3, Mavic, Inspire, Mini, Air, or any other drone model.

Use specified charger only — charge with original DJI Phantom 4 charger or certified PH4 hub; do not use third-party chargers with incorrect voltage.

Hot after flight — battery surface temperature is high immediately after landing; allow to cool before handling or charging.

Li-Po safety — avoid puncture, crush, high heat, open flame; store in fireproof Li-Po bag if possible.

No over-discharge — land before battery reaches critical low; deep discharge damages Li-Po cells permanently.

Hub input limit — max 17.4V/4A; using higher voltage adapter may damage the hub or batteries.