Rear Camera for Skoda Octavia MK2 Superb MK2 Boot Handle Trunk Parking Camera
Specification:
Color: Black
Size: Like the picture show
Power cable Length: approx. 1 meter
Extension cable Length: approx. 6 meters
Sensor: Color CCD
Effective pixels: 728*512
TV System: NTSC/ PAL
AGC: Auto
BLC: Auto
White Balance: Auto
S/N Ratio: More than 48dB
Lens Angle: 170°
Resolution: 500 TV Lines
Operation Temperature: -20°C - 80°C RH95% Max
Waterproof: IP69
Voltage: 12V
Feature
- 100% Brand new and high quality.
- High sensitivity and low power consumption.
- Simple design and easy to use.
- Night vision and water proof.
- This camera can give you a full sight of the back of your car when you are driving.
We have this product listed out as being tried and fitted with variants of the vehicles listed below. We strongly recommend you cross reference the details in the description against your vehicle to ensure the item is suitable for your vehicle.
COMPATIBLE WITH THE FOLLOWING MODELS:
Audi A1 [8X] (2010-2018)
Skoda Fabia [MK2 5J] (2007-2014)
Skoda Rapid (2012-2017)
Skoda Roomster [5J] (2006-2015)
Skoda Octavia [MK2 1Z] (2003-2013)
Skoda Superb [MK2 B6] (2008-2015)
Skoda Yeti [5L] (2010-2017)
Volkswagen Golf [MK5 Variant] (2007-2009)
Volkswagen Golf [MK6 Variant] (2010-2013)
Volkswagen Jetta [MK5 Variant] (2008-2009)
SIZE: 90mm x 34mm
PLEASE NOTE: Designed to replace the boot handle part number 5J0827566E. Please make sure you have the same 2 pin (15mm x 9mm) electrical connection on your boot handle, as some variants have a 2 pin with a clip hold (15mm x 9mm).
How to Install: (Only for reference)
1. Take out your stock license plate light at the back of your car.
2. Fix the camera to where the stock license plate light was.
3. Connect the power cables of the Camera to your Reverse lights - red wire to positive and black wire to negative.
4. Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
5. Connect the video cable of the camera to the extension cord.
6. Connect the extension cord to your car monitor.
7. You will see the images when your car is in reverse shift.
Color: Black
Size: Like the picture show
Power cable Length: approx. 1 meter
Extension cable Length: approx. 6 meters
Sensor: Color CCD
Effective pixels: 728*512
TV System: NTSC/ PAL
AGC: Auto
BLC: Auto
White Balance: Auto
S/N Ratio: More than 48dB
Lens Angle: 170°
Resolution: 500 TV Lines
Operation Temperature: -20°C - 80°C RH95% Max
Waterproof: IP69
Voltage: 12V
Feature
- 100% Brand new and high quality.
- High sensitivity and low power consumption.
- Simple design and easy to use.
- Night vision and water proof.
- This camera can give you a full sight of the back of your car when you are driving.
We have this product listed out as being tried and fitted with variants of the vehicles listed below. We strongly recommend you cross reference the details in the description against your vehicle to ensure the item is suitable for your vehicle.
COMPATIBLE WITH THE FOLLOWING MODELS:
Audi A1 [8X] (2010-2018)
Skoda Fabia [MK2 5J] (2007-2014)
Skoda Rapid (2012-2017)
Skoda Roomster [5J] (2006-2015)
Skoda Octavia [MK2 1Z] (2003-2013)
Skoda Superb [MK2 B6] (2008-2015)
Skoda Yeti [5L] (2010-2017)
Volkswagen Golf [MK5 Variant] (2007-2009)
Volkswagen Golf [MK6 Variant] (2010-2013)
Volkswagen Jetta [MK5 Variant] (2008-2009)
SIZE: 90mm x 34mm
PLEASE NOTE: Designed to replace the boot handle part number 5J0827566E. Please make sure you have the same 2 pin (15mm x 9mm) electrical connection on your boot handle, as some variants have a 2 pin with a clip hold (15mm x 9mm).
How to Install: (Only for reference)
1. Take out your stock license plate light at the back of your car.
2. Fix the camera to where the stock license plate light was.
3. Connect the power cables of the Camera to your Reverse lights - red wire to positive and black wire to negative.
4. Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
5. Connect the video cable of the camera to the extension cord.
6. Connect the extension cord to your car monitor.
7. You will see the images when your car is in reverse shift.