Fit for:
Volvo C70 MK I 3/ 1997 - 10/ 2005 Petrol: 2.3, 2.5, 2.0, 2.0 T, 2.4 T, 2.5 T B 5204 T2, B 5204 T3, B 5204 T4, B 5234 T3, B 5234 T9, B 5244 S, B 5244 T
Volvo S60 7/ 2000 - 4/ 2010 Petrol: 2.4, 2.5 B 5204 T5, B 5234 T3
Volvo S70 P80_ 1/ 1996 - 11/ 2000 Petrol: 2.3, 2.4, 2.5, 2.0, 2.0 T, 2.4 T, Bi-Fuel: 2.4
Volvo S80 MK I 5/ 1998 - 7/ 2006 Petrol: 2.4, 2.8, 2.9, 2.0, 2.0 T, 2.4 T, 2.5 T, 3.0
Volvo V70 MK II 3/ 2000 - 9/ 2007 Petrol: 2.3, 2.4, 2.4 T, 2.5 T B 5234 T3, B 5234 T7, B 5244 S, B 5244 S2, B 5244 SG, B 5244 T3, B 5244 T5, B 5254 T2, B 5254 T4
Volvo V70 P80_ 1/ 1997 - 5/ 2000 Petrol: 2.3, 2.4, 2.5, 2.0, 2.0 T, 2.3 T, 2.4 T, 2.5 T
Volvo XC70 Cross Country 11/ 1997 - 9/ 2007 Petrol: 2.4 T, 2.5 T B 5244 T3, B 5254 T, B 5254 T2
Volvo XC90 MK I 10/ 2002 - / 2014 Petrol: 2.5 T, 3.0 B 5254 T2, B 6294 T
Specifications:
Manufacturer Part Number: 30713416, 9125601
Reference OE/OEM Number: 0040102019, 0 040 102 019, 0221604001, 0 221 604 001, 0221604008, 0 221 604 008, 10482, 12799, 155088, 20186, 413660180, 413660181, 8010482, 880133, 9.6348, CL121, CU1222, DMB927, XIC8317, ZSE019
Number of Pins: 4 pin connector
Colour: Black
Product Material: Metal, plastic
CAUTION: Before starting the installation, please Disconnect the Negative Terminal of the Battery to prevent short-circuiting.
Product Weight (Packaging Weight): 267g
Package Sizes (cm): 18.5 x 11 x 7
(Kindly Note: Packaging sizes/weight may have slight differences due to manual measurements. Product quality remains unaffected!)
Features：
*Perfect Adaptability
Manufactured in accordance with the specifications of the adapted parts for a perfect fit.
*High Quality
Made of high quality material with voltage resistance, aging resistance, heat shock resistance, etc., it can withstand high temperature working environment for a long time.
*Safety & Durability
Using high conductive copper wire and high dielectric performance epoxy resin to ensure that there is no dead space in the potting, avoiding air bubbles, slits, etc. to cause voltage breakdown.
*Excellent Ignition Performance
This ignition coil is able to ignite successfully under different working conditions, featuring high ignition energy, long spark duration, and good low-temperature starting.
*Stable Performance
Uniform colour of the coil, no impurity black spot. It has even resistance value and good consistency, allowing it to work stably.
INSTALLATION NOTES
Before Installation:
1. Disconnect the power supply
Before starting the installation, make sure you have disconnected the negative terminal of the vehicle's battery to prevent unintended passage of current and avoid the risk of electric shock or short circuit.
2. Clean the installation location
Before installing a new ignition coil, clean the ignition coil holder and the area around it to ensure that there is no dust, oil or other contaminants that could affect the contact quality.
3. Check the spark plug
Check the condition of the spark plugs before installing a new ignition coil. If the spark plugs are worn or have reached their replacement cycle, it is recommended that they be replaced at the same time to ensure optimum performance of the ignition system.
When Installing:
4. Correct torque
When installing the ignition coil, it is important to use the correct torque to hold it in place. Over-tightening may damage the ignition coil or mount, while over-loosening may result in poor contact or looseness.
5. Connection check
Ensure that the electrical connections to the ignition coil are secure and not corroded. After installation, check that all connections are correct and that the ignition coil and associated cables have not been pulled or twisted.
6. Replacement one by one
If more than one ignition coil is being replaced, it is recommended that they be replaced one at a time to avoid confusing the ignition sequence or electrical connections.
After Installation:
7. Check for error codes
After installation, please start the engine and check whether any error codes appear. If any error lights come on or if any abnormalities are found in the ignition system, further inspection and diagnosis should be carried out immediately.
Packaging Type:
Carton packaging
Packaging Include:
Ignition Coil * 1
