|
TECHTONGDA |
|||||||||||||||||||||||
|
42QT Small Hydraulic Station Hydraulic Vane Pump Double-end Valve 220V 7MPa |
|||||||||||||||||||||||
![]() |
|||||||||||||||||||||||
| Product Description: | |||||||||||||||||||||||
|
Small hydraulic stations are suitable for places with limited space or applications that require movement, and are suitable for the hydraulic requirements of small machinery and equipment. They are small and easy to install and move, which makes them ideal for use in space-constrained environments. Different types of hydraulic components and hydraulic valves can be configured according to needs to meet different process and application requirements. |
|||||||||||||||||||||||
|
|||||||||||||||||||||||
| Product Details: | |||||||||||||||||||||||
![]() |
Manometer
|
||||||||||||||||||||||
|
Liquidometer
|
![]() |
||||||||||||||||||||||
![]() |
Pure copper wire motor
|
||||||||||||||||||||||
|
Oil filler
|
![]() |
||||||||||||||||||||||
| Product Features: | |||||||||||||||||||||||
| 1. The use of hard tube wiring, longer life, good heat dissipation low heat, more stable operation. 2. The oil tank adopts the thickened profile painting process, which does not lose the paint and does not rust. 3. The machine is small in size and equipped with handles on both sides for easy picking up. 4. Small pressure pulsation, high volumetric efficiency, can automatically adjust the flow. 5. Low installed power, low noise. 6. The machine is a variable vane pump, more sensitive response, response characteristics only 0.2-0.3s can complete the pressure regulation. |
|||||||||||||||||||||||
| System Parameter Regulation: | |||||||||||||||||||||||
| - Pressure Adjustment: Slowly Adjust The Handle Of The Relief Valve Clockwise Until The Cylinder Begins To Move And Stop The Adjustment. After The Cylinder Is In The Bottom, Continue To Slowly Adjust The Handle Of The Relief Valve, Ensure That The Pressure Gauge Is Adjusted To The Required Working Pressure, And Tighten The Locking Nut. (Adjust The Handle From Loosest To Tightest, And The Pressure From Smallest To Maximum.) - Speed Adjustment: When The Cylinder Is Moving Forward, Slowly Adjust The Throttle Handle Clockwise Until The Desired Speed Is Adjusted, And Tighten The Lock Nut. (Adjust The Handle From Loosest To Tightest, And The Speed From Fastest To Slowest.) |
|||||||||||||||||||||||
| Usage instructions: | |||||||||||||||||||||||
| 1. Connect to single-phase 220V power and start the motor. 2. Observe the operation of the hydraulic pump to ensure normal functioning. 3. Control the flow direction and rate of hydraulic oil via hydraulic valves according to actual needs. 4. During operation, monitor the hydraulic station's working status. If any abnormal situation occurs, stop the machine for maintenance immediately. 5. After operation, disconnect the hydraulic station's power supply to stop the motor. |
|||||||||||||||||||||||
| Note: After The Parameters Are Adjusted, Run The Cylinder Several Times Without Load To Remove The Air In The System! | |||||||||||||||||||||||
| Maintenance: | |||||||||||||||||||||||
| - Check the oil temperature, cleanliness of the hydraulic system and the noise of the pumping station regularly. If the oil temperature is too high or the sound is abnormal, please check whether the hydraulic oil is too little, whether the oil suction filter is blocked, resulting in empty oil pump, need to refuel and replace the oil suction filter. - Hydraulic oil such as serious pollution, odor deterioration phenomenon, should be replaced in time, taking into account the high precision requirements of the proportional valve, the general hydraulic oil four to six months to replace once. (According to the frequency of use of the equipment can be replaced in advance or delay) - Check whether the valve assembly and pipe joint on the hydraulic station have oil leakage. If there is leakage, the sealing assembly should be replaced to ensure the volumetric efficiency of the hydraulic system. - Whether the electromagnetic reversing valve is sensitive, whether the relief valve pressure regulation effect is normal, whether the throttle valve speed regulation is effective, such as abnormal, should be repaired or replaced hydraulic components. |
|||||||||||||||||||||||
![]() |
|||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||
| Item Included(029004) | |||||||||||||||||||||||
|
Small hydraulic station *1 |
|||||||||||||||||||||||
|
|||||||||||||||||||||||