RV Electric Step with LED Light Aluminum Alloy Folding Single Ladder Load 200KG
▍ Product Overview
This RV electric step is a high-quality automatic folding single-step ladder designed for recreational vehicles, camper vans, and boats. Constructed from lightweight yet durable aluminum alloy, it features a powerful DC motor drive system that extends and retracts the step automatically, providing convenient and safe entry and exit for your vehicle.
With an impressive load capacity of 200kg (440 lbs) and a wide, slip-resistant platform surface, this step ensures stable and secure footing for users of all sizes. The integrated LED lighting system illuminates the step area for safe nighttime use, while the intelligent control panel offers both automatic and manual operation modes to suit different scenarios.
The compact folding design minimizes the step's footprint when retracted, reducing wind resistance and preventing damage during travel. The step is compatible with a wide range of RV models and can be quickly installed using the included mounting hardware and pre-wired harness.
▍ Product Parameters
| Material: | Aluminum Alloy |
| Color: | Silver |
| Voltage: | DC 12V |
| Motor Power: | 80W |
| Working Current: | 10A |
| LED Light Power: | 6W (12V) |
| Load Capacity: | 200kg (440 lbs) |
| Folded Size: | Approx. 400 x 552 x 137mm |
| Unfolded Size: | Approx. 570 x 552 x 180mm |
| Installation Size: | 519 x 195mm |
| Mounting Screw: | M10 |
| Application: | RV, Camper Van, Boat |
| Net Weight / Gross Weight: | 8.5kg (18.7 lbs) / 9.6kg (21.2 lbs) |
| Package Dimensions: | 56 x 47 x 22cm (22" x 18.5" x 8.7") |
▍ Product Features & Advantages
Wide Anti-Slip Aluminum Platform
The step platform features multiple parallel aluminum alloy extrusion bars arranged across the full width of the tread surface, creating excellent grip and drainage capability. The wide 552mm platform provides ample foot space for confident entry and exit, while the raised ribbed pattern on each bar effectively channels away water and debris to prevent slipping. The corrosion-resistant aluminum construction ensures long-lasting performance in all weather conditions without rusting or deterioration.
Powerful 80W Motor Drive System
Equipped with a robust 80W DC stepper motor that delivers smooth and reliable extension and retraction of the step platform. The motor operates on standard 12V DC power with a 10A working current, drawing directly from the vehicle's battery system. The motor assembly is protected by a durable black housing with a coiled wire conduit that prevents cable damage from repeated motion. The drive mechanism provides consistent torque output to reliably deploy and stow the step under the full 200kg rated load capacity.
Complete Intelligent Control System
The step comes with a fully pre-wired control system including a central controller unit, a three-button wall-mounted control panel, and a complete color-coded wiring harness. The controller provides stall detection, overtime protection, and over-temperature protection for safe operation. The control panel features clearly labeled buttons for step extend/retract, LED light on/off, and an auto/manual mode switch. In auto mode, the step extends when the door opens and retracts when the door closes via the included door sensor switch. All wiring uses standardized AWG gauges with plug-and-play connectors for easy installation.
Precision Stepper Motor with Protection
The heart of the drive system is a precision stepper motor rated at DC 12V and 80W, clearly labeled with wiring instructions (Red: VCC, Black: GND). The motor features built-in protection against overcurrent, overheating, and mechanical overload. The controller will automatically activate overheat protection after 10 consecutive operations, allowing the system to cool down before resuming normal function. This intelligent protection ensures long motor life and safe operation in demanding RV environments where the step may be used dozens of times per day.
Heavy-Duty Folding Hinge Mechanism
The step employs a robust scissor-style folding mechanism with thick steel linkage arms and large-diameter pivot pins, providing smooth and stable deployment from the folded to the extended position. The hinge points are secured with high-strength bolts and self-locking nuts to prevent loosening from road vibrations. The curved silver alloy end caps on both sides not only provide an attractive finished appearance but also serve as protective bumpers to prevent damage to the vehicle body and surrounding structures during step operation.
Rugged Steel Mounting Bracket
The black -coated steel mounting bracket provides a secure interface between the step assembly and the vehicle chassis. The bracket features multiple elongated mounting slots that allow flexible positioning during installation to accommodate different RV frame rail configurations. Constructed from heavy-gauge steel plate, the bracket easily withstands the dynamic loads imposed during step deployment and the static loads from users stepping on the platform. The four M10 mounting bolt holes are reinforced for maximum holding strength.
Advantage Comparison
- [200kg High Load Capacity]: Engineered to support up to 200kg (440 lbs) with a robust aluminum alloy platform and reinforced steel mounting bracket, ensuring safe and stable entry/exit for all users and their gear.
- [Automatic Door-Sensing Operation]: The intelligent control system extends the step automatically when the vehicle door opens and retracts it when the door closes, with manual override capability via the control panel for maximum convenience and flexibility.
- [Built-in LED Safety Lighting]: Integrated 6W LED light bar illuminates the step area automatically during nighttime use, enhancing visibility and safety when entering or exiting the vehicle in dark conditions.
- [Multiple Safety Protections]: The controller features stall detection, overtime protection, and over-temperature protection that automatically safeguards the motor and electronics from damage during heavy or extended use.
- [Compact Folding Design]: When retracted, the step folds to just 137mm in profile, minimizing exposure to road debris and weather while reducing wind resistance and fuel consumption during travel.
▍ Operation Method
1. Installation Preparation:
Disconnect the vehicle battery before installation to prevent electrical shorts. Identify the mounting location on the vehicle chassis frame rail with a clear area of at least 519 x 195mm. Ensure the mounting surface is clean, flat, and free of rust or debris. The step requires a 12V DC power source capable of supplying at least 10A continuous current.
2. Mount the Step:
Position the step assembly against the vehicle frame at the desired height. The step should be mounted so the platform will extend horizontally when deployed. Mark the four mounting hole locations through the bracket slots. Drill pilot holes if necessary, then secure the step using the four included M10 hex bolts with M10 stainless steel washers. Torque the bolts to approximately 40 Nm. Verify the step is level and the folding mechanism moves freely without binding.
3. Electrical Connection:
Connect the main power wires (Red to positive, Black to negative) to the vehicle's 12V battery or a fused 12V power distribution block using a minimum 1.5mm² wire. Connect the door sensor switch to the designated wires and mount the magnetic switch halves on the door frame and door so they align when the door is closed. Install the control panel in a convenient interior location and connect it using the provided plug-and-play harness. All connectors are keyed to prevent incorrect connection.
4. Auto Mode Operation:
Set the control panel switch to "Auto" mode. In this mode, when the vehicle door is opened, the door sensor disconnects and the step automatically extends while the LED light turns on. When the door is closed, the sensor connects and the step automatically retracts while the LED turns off. For safety, pressing the step button is disabled when the door is closed, with a buzzer alarm if pressed.
5. Manual Mode Operation:
Set the control panel switch to "Manual" mode. In this mode, the step will not move automatically when the door opens or closes. Press the step button on the control panel to extend or retract the step as needed. Press the LED button to turn the light on or off independently. Manual mode is useful when you want to control the step position manually, such as when parked for extended periods.
6. Maintenance:
Periodically inspect the mounting bolts for tightness, especially after long trips. Keep the step platform clean and free of debris. Lubricate the hinge pins with a light machine oil every 6 months. Check the wiring connections annually for corrosion or looseness. If the step fails to operate, check the vehicle battery voltage (must be above 11V) and verify all wiring connections are secure.
Disconnect the vehicle battery before installation to prevent electrical shorts. Identify the mounting location on the vehicle chassis frame rail with a clear area of at least 519 x 195mm. Ensure the mounting surface is clean, flat, and free of rust or debris. The step requires a 12V DC power source capable of supplying at least 10A continuous current.
2. Mount the Step:
Position the step assembly against the vehicle frame at the desired height. The step should be mounted so the platform will extend horizontally when deployed. Mark the four mounting hole locations through the bracket slots. Drill pilot holes if necessary, then secure the step using the four included M10 hex bolts with M10 stainless steel washers. Torque the bolts to approximately 40 Nm. Verify the step is level and the folding mechanism moves freely without binding.
3. Electrical Connection:
Connect the main power wires (Red to positive, Black to negative) to the vehicle's 12V battery or a fused 12V power distribution block using a minimum 1.5mm² wire. Connect the door sensor switch to the designated wires and mount the magnetic switch halves on the door frame and door so they align when the door is closed. Install the control panel in a convenient interior location and connect it using the provided plug-and-play harness. All connectors are keyed to prevent incorrect connection.
4. Auto Mode Operation:
Set the control panel switch to "Auto" mode. In this mode, when the vehicle door is opened, the door sensor disconnects and the step automatically extends while the LED light turns on. When the door is closed, the sensor connects and the step automatically retracts while the LED turns off. For safety, pressing the step button is disabled when the door is closed, with a buzzer alarm if pressed.
5. Manual Mode Operation:
Set the control panel switch to "Manual" mode. In this mode, the step will not move automatically when the door opens or closes. Press the step button on the control panel to extend or retract the step as needed. Press the LED button to turn the light on or off independently. Manual mode is useful when you want to control the step position manually, such as when parked for extended periods.
6. Maintenance:
Periodically inspect the mounting bolts for tightness, especially after long trips. Keep the step platform clean and free of debris. Lubricate the hinge pins with a light machine oil every 6 months. Check the wiring connections annually for corrosion or looseness. If the step fails to operate, check the vehicle battery voltage (must be above 11V) and verify all wiring connections are secure.
▍ Safety Precautions
WARNING: Read all safety instructions before installation and use. Improper installation or operation may result in personal injury or equipment damage.
1. Professional Installation Recommended: This electric step should be installed by a qualified technician familiar with RV electrical and mechanical systems. Incorrect installation may cause step failure, vehicle damage, or personal injury.
2. Battery Disconnection: Always disconnect the vehicle battery before performing any electrical work. Failure to do so may result in electrical shorts, fires, or equipment damage.
3. Fuse Protection: The step power line must be protected by an appropriate fuse (minimum 15A) installed as close to the battery as possible. Never operate the step without proper fuse protection.
4. Maximum Load: Do not exceed the rated load capacity of 200kg (440 lbs). Overloading may damage the step mechanism, motor, or mounting bracket and create a fall hazard.
5. Pinch Hazard: Keep hands, feet, and loose clothing clear of the step mechanism during extension and retraction. The moving parts can cause serious pinch injuries. Never attempt to block or obstruct the step during operation.
6. Children and Pets: Supervise children and pets when the step is in operation. The automatic movement in auto mode may startle or injure unsupervised children or animals near the step.
7. Weather Exposure: While the aluminum construction is corrosion-resistant, the electrical components (controller, wiring) should be protected from direct water exposure. Install the controller in a dry interior location.
8. Pre-Travel Check: Always verify the step is fully retracted and secured before driving the vehicle. A partially deployed step may contact the road surface and cause severe damage or loss of vehicle control.
9. Overheat Protection: If the step stops operating after extended use, allow it to cool down. The controller activates overheat protection after 10 consecutive operations and will resume normal operation once the temperature decreases.
10. Regular Inspection: Inspect the step, mounting hardware, and electrical connections before each trip. Check for loose bolts, worn hinges, damaged wiring, or corrosion. Address any issues immediately before using the step.
2. Battery Disconnection: Always disconnect the vehicle battery before performing any electrical work. Failure to do so may result in electrical shorts, fires, or equipment damage.
3. Fuse Protection: The step power line must be protected by an appropriate fuse (minimum 15A) installed as close to the battery as possible. Never operate the step without proper fuse protection.
4. Maximum Load: Do not exceed the rated load capacity of 200kg (440 lbs). Overloading may damage the step mechanism, motor, or mounting bracket and create a fall hazard.
5. Pinch Hazard: Keep hands, feet, and loose clothing clear of the step mechanism during extension and retraction. The moving parts can cause serious pinch injuries. Never attempt to block or obstruct the step during operation.
6. Children and Pets: Supervise children and pets when the step is in operation. The automatic movement in auto mode may startle or injure unsupervised children or animals near the step.
7. Weather Exposure: While the aluminum construction is corrosion-resistant, the electrical components (controller, wiring) should be protected from direct water exposure. Install the controller in a dry interior location.
8. Pre-Travel Check: Always verify the step is fully retracted and secured before driving the vehicle. A partially deployed step may contact the road surface and cause severe damage or loss of vehicle control.
9. Overheat Protection: If the step stops operating after extended use, allow it to cool down. The controller activates overheat protection after 10 consecutive operations and will resume normal operation once the temperature decreases.
10. Regular Inspection: Inspect the step, mounting hardware, and electrical connections before each trip. Check for loose bolts, worn hinges, damaged wiring, or corrosion. Address any issues immediately before using the step.
▍ Product Dimensions
▍ Item Included (053018)
| Electric Step Main Unit *1 | Control Unit with Wiring Harness *1 |
| Wall-Mounted Control Panel *1 | Door Sensor Switch *1 |
| Mounting Bolts M10 *4 | User Manual *1 |
On Jul 23, 2026 at 22:25:21 PDT, seller added the following information:
On Jul 29, 2026 at 00:14:26 PDT, seller added the following information: