12V Boat Yacht Submersible Sump Water Bilge Drainage Pump
Features:
1. Compact, efficient and long life pump.
2. Absorption does not require full submersion.
3. Fully submersible, anti-rust and anti-corrosion.
4. Pump can withstand temperatures up to 110°F (43°C).
5. Running without water for a short time will not burn out the pump.
6. Easy-to-clean spring lock filter for easy installation and maintenance.
7. Ignition protection, anti-air lock protection, will not burn out when dry.
8. Features stainless steel drive shaft and sturdy plastic body with integral filter.
9. The pump has the function of overload and overheating protection, less noise, higher speed, safer and more reliable operation.
10. The corrugated spiral and anti twist structure has an excellent bending radius, ensuring maximum durability and maintaining stable flow.
Specification:
Condition: 100% Brand New
Material: ABS + Stainless Steel
Color: Red, White, Blue
Fitment Type: Performance/Custom
Voltage: 12V DC
AMP Draw: 3 Amp
Flow Rate: 1100GPH
Outlet Pipe Diameter: 29mm
Maximum Temperature: 110°F (43°C) Max.
Fitment:
Suitable for 1-1/8" O.D pump outlet.
Ideal for fishing boats, cruise ship, yachts, ponds, pools, spas, motorhomes, agricultural irrigation, long-distance pumping in the yard, solar water system, aquariums, fountain and other applications where you have to remove water from.
Not to be used with AC voltage applications.
Not for use with below waterline thru-hull connections.
Please check your bilge pump outlet size, our photos and the description before purchase.
Packing Included:
1 x Submersible Water Pump
Installation Method:
Connect black/blue wire to negative and red wire to positive.
Notes:
1. All dimensions are measured by hand, there may be small deviations.
2. No installation instruction included, professional installation is highly recommended.
3. These pumps are designed for intermittent use only, not designed for continuous use.
4. Do not put the wire connection in the water, otherwise the water pump will not work properly.
5. This pump is designed for fresh water and salt water. Polarity is important. If it is not correct, the pump rotates backwards.
6. When the water pump cannot start or stop automatically, please clean the three sensing electrodes with a hard brush first.
7. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
