Features:

Input Voltage: DC 12V

Rated Current: 13A

Absorbing Distance: 3-5m

Flow Rate: 40L/min

Load Speed: 3300R/min

Power: 200W

Lift Distance: 10m

Oil Pipe Connection Size: 25mm inner diameter

Used for: diesel, kerosene

Note:

1. The oil pump works continuously without oil-absorbing idle for no more than 5 minutes, in order to avoid the pump core, scraping frictional heat damage.

2. Pump after 500 hours of operation, and should ask for professional maintenance.

3. Special oil pump self-priming pump for diesel. Should not be used for low ignition point and high viscosity oil, gas gasoline.

4. Before use, confirm that the power supply voltage is consistent with the oil pump.

5. DC power supply (+) (-), the red line is positive; otherwise, no oil pump reversal.

6. As indicated by the arrows for the inlet and outlet pipes, the inlet pipe and fittings shall not leak. In order to ensure the absorption process.

7. The filter inlet pipe cutting for the assembly, avoiding hard debris suction pump cavity and damaging the pump core, scraping.

8. Always remove filter surface dirt; the surface of the screen can not be reused. Stockings wrapped meticulously filtering. Only in the outlet end with stockings wrapped to filter, or filter blocking caused by reduced flow and pump damage.

9. Not suitable for low-combustion fuel (such as gasoline, liquefied petroleum gas, alcohol, etc.) transmission

Package Includes:

1 x Fuel Transfer Pump

2 x Copper Couplings

2 x Hose Clamps

1 x PTFE tape

1 x Filter