Hitachi HiKOKI 36V 125mm cordless chip saw cutter CD3605DA (NN) (main unit only)

Saw blades used: Outer diameter 110~125mm, Hole diameter 20mm
, Maximum cut depth: 46mm,
No-load rotational speed: 3600min-1 (power mode), 2400min-1 (silent mode),
Compatible batteries: Multi-volt batteries (with remaining battery indicator),
Charger: UC18YDL (with cooling function),
Standard accessories: Tip saw (for mild steel), hex bar spanner (5mm)
Brand: HiKOKI
Recommended usage location: Iron
Power source: Battery
Included components: Instruction manual Product
dimensions: 28.6 length x 19.3 width x 23.6 height cm
Voltage: 36 volts Product
weight: 2.98 kilograms
Speed: 3600 revolutions per minute Number
of batteries: 1 lithium-ion battery
Number of units: 1
High power everywhere. Easy
cutting even under heavy load.
Compared CD18DBL to 18V models, cutting speed is about 1.5 times faster, pressure load is about 2 times higher, silent mode and kickback mitigation system are included.

Manufacturer Description
Specifications Hikoki Chip Saw Cutter Comparison Table
This is a modal window. Maximum cutting speed comparison (approximate) *1 Cutting conditions: C channel (width 60 x height 30 x thickness 2.3mm) *1 values are for reference only.
It varies depending on the materials and conditions.
Comparison with our previous product, cordless chip*2 saw-cutter CD18DBL.
The numbers are for reference only.
It varies depending on the materials and conditions.
Comparison of maximum pressure load during heavy-duty cutting (approximate) *1 Cutting conditions: C channel (width 60 x height 30 x thickness 2.3mm) *1 values are for reference only.
It varies depending on the materials and conditions.
Comparison with our previous product, cordless chip*2 saw-cutter CD18DBL.
The numbers are for reference only.
It varies depending on the materials and conditions.
Compact and easy to handle. Total height 236mm / Lightweight 2.9kg. C-channel cutting: approx. 110 pieces (cutting dimensions: width 60mm x height 30mm x thickness 2.3mm). Wire conduit cutting: approximately 320 pieces (cutting size: o25.4mm x thickness 1.6mm). Light ceiling material cutting: approximately 750 pieces (cutting dimensions: width 50mm x height 19mm x thickness 0.5mm). *Figures are for reference only.
It varies depending on the materials and conditions.
Achieves both low noise and improved motor efficiency.
Furthermore, when motor load increases, it automatically switches to normal power mode.
Smooth cutting is possible depending on the cutting situation.
The motor and battery mounting sections are flat, allowing stable operation even when the main unit is placed horizontally during saw blade replacement. Furthermore, by adding
soft material to the contact surface, it is also effective in preventing damage to the other material. The
storage case has been reduced by about 45%*, making it more convenient to carry.
*Comparison with our previous product, the Cordless Tip Saw Cutter CD18DBL Case.
The numbers are for reference only.
* CD3605DA (NN) cases are not included.
You can switch between three lighting modes: continuous on, switch-activated, and OFF.
By monitoring changes in motor speed and instantly stopping the motor when the speed drops rapidly due to the saw's blade jamming, kickback movement is reduced. *Note: Depending on the working conditions and conditions, it
may not operate or may not perform at full capacity.
During work, ensure the material is securely installed and secured, and the main body is held in place.
Also, please carefully read the instruction manual under "About Kickbacks" to avoid kickbacks.
CD3605DA CD14DBL CD18DBL CD7SA CD3607DA Brand
Introduction ▽ Product Feature with First Repair Warranty ▽ Professional Cordless Power Tools Special ▽ Accessories Special ▽ Cleaner Special ▽ Gardening Special ▽ Cold and Warm Storage Special ▽ Battery & Charger Special ▽DIY
Special HiKOKI is a power tool brand operated by Koki Holdings, a global Japanese manufacturer of power and air tools with over 70 years of history. With the solid
technology and development capabilities we have cultivated since our founding, we will continue to create and deliver products that customers will choose as they say, "This is what I wanted."


Japanese electrical products typically operate at 100V input voltage (Type A plug). If the voltage is not specified in the description or Item Specifics, the product may only support 100V input. A voltage converter may be required to use 100V devices in your country. Please contact the seller for accurate input voltage details.