KBS DiamondFinish; TopCoat; Gloss Clear; Quart

DiamondFinish Gloss Clear TopCoat is a permanent moisture-cured UV stable coating primarily used for topcoating surfaces previously sealed with RustSeal for topcoating direct-to-metal or to coat over any other paint/primer application. The Clear Coat formula can be applied Direct To Metal or over other coatings. This high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing cracking or peeling.Apply directly to Painted Surfaces with Minimal Surface Prep. Incredibly tough and hard like no other clear coat on the market. Can be applied with a brush (without leaving any brush marks) roller and conventional spray gun. Unlike two-part coatings no hardener is needed with DiamondFinish. Just stir and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50� to 86� Fahrenheit.Can be applied directly to a cured Automotive basecoat Standard solid color paints and Single Part or Two Part paints. It can also be applied to Non Ferrous metals including Aluminum Alloys Brass Chrome and CopperAble to withstand the harshest of chemicals including fuels solvents Battery acid Brake fluid Ethanol Methanol MEK Hydrochloric Acid Fertilizers and Acetone. Graffiti Resistant: because of its chemical resistance grafitti just won't stick and can be removed simply with a solvent soaked rag. Great for high temperature automotive applications including the use on cylinder heads engine blocks brake components and even inlet manifolds without yellowing up to 300� Fahrenheit.DiamondFinish Applications:Protecting steel and plastic bumpers paint workAutomotive aluminium fitting fuel tanks and partsProtecting existing paint work from physical damagePrevents chemical attack from acids and alkalis on existing paint workProtects paint work from all fuelsCustom automotive refinishFeatures and Benefits:Pint of DiamondFinish Clear could cover 50 sq. ft. single coat coverageSingle component formulaOver 60% solidsDirect to Metal application - no additives neededApply directly to painted surfacesTougher and harder than 2 part clear coatsSeals both paints and metalsSelf leveling (no brush marks)Simple brush or spray applicationHigh temperature resistance suitable for motors and brake callipersPermanent UV stabilityHigh chemical resistance (including fuels)Graffiti proofRecoat in 1-2 hoursSeals ferrous and non ferrous metalsBreakthrough High Solids Coating Technology