250A DC fuses for battery, inverter and busbar circuits in 12V, 24V and 48V systems
A pack of five 250A MEGA fuses rated to 80V DC. They protect the high-current cables between batteries and inverters, charge controllers and busbars, and fit standard MEGA fuseholders.


Not included, sold separately: MEGA fuseholder – rated for the circuit's current and voltage; needed to install the fuse.
Overcurrent protection on heavy-duty DC circuits such as inverter feeds.
Suits 12V, 24V and 48V battery systems.
Spares on hand, or one fuse each for several circuits.
MEGA fuses protect the cables between batteries and inverters. They are available in current ratings from 60A to 500A; this pack contains the 250A rating. Rated up to 80V, they can be used in 12V, 24V and 48V systems.
The Victron Energy MEGA-fuse 250A/80V is a high-current fuse rated for use in 12V, 24V and 48V DC battery systems. Sold in a pack of five, it suits installers who need overcurrent protection on high-current DC circuits such as inverter feeds, battery interconnects and busbar connections.
MEGA fuses are a widely used format in DC power systems, particularly where high current flows between batteries and inverters or charge controllers. The 250A rating is a common choice for inverter installations in the 2kW to 5kW range on 12V or 24V systems, where cable runs from the battery bank need protection against short-circuit faults. At 80V DC, the fuse is rated above the maximum operating voltage of a 48V battery system, giving a safety margin.
The MEGA format uses a bolt-down or clip-in fuseholder rather than a plug-in blade, which makes it more suitable for high-current applications than standard automotive blade fuses. This fuse is designed to be used with a compatible MEGA fuseholder, which is sold separately. Always check that the fuseholder is rated to match or exceed the fuse's current and voltage ratings before installation.
MEGA fuses must be installed in a compatible MEGA fuseholder rated for the circuit voltage and current. Position the fuse as close to the positive battery terminal as practicable to protect the full length of the cable run.
DC wiring at these current levels carries significant fault energy, so all connections should be made by a qualified electrician or competent installer familiar with DC battery systems. Make sure the cable cross-section is correctly sized for 250A continuous current before choosing this fuse rating.
| Model | MEGA-fuse 250A/80V |
|---|---|
| Part number | CIP138250020 |
| Current rating | 250A |
| Voltage rating | 80V DC |
| Suitable systems | 12V, 24V and 48V DC |
| Fuse format | MEGA |
| Fuseholder | MEGA fuseholder (sold separately) |
| Pack quantity | 5 fuses |
|---|---|
| Pack weight | 45g |
| Gross weight (packed) | 51g |
| Packaging dimensions | 170 x 100 x 10mm |
| Country of origin | China |
| HS code | 85361090 |
| Barcode (EAN) | 8719076061724 |
If your item develops a fault, message us through eBay with your order and a short description or photo of the fault. We arrange the return of faulty items at our cost, test the item, and repair or replace it if it is faulty and within the manufacturer's warranty.