Specifications
Manufacturer Part Number: S21307
Interchange Part Number: S21307
OE/OEM Part Number: S21307
Applicable Models:
Direct Replacement:
For Hendrickson S21307 S-21307
Cross References:
- For Hendrickson S-21307
- For Meritor R309575
- For Sirco SH2034
- For Tiger Tool 15040
- For BWP HE9AA-T
- For Dayton 334-936
- For Euclid E-9575
Applications:
- For Automann TS TRB5912
- For Dayton TS 334-1576
- For Euclid TS E-10729A
- For Flagg TS HT245
- For Gaff TS 13628
- For Hendrickson TS S-24691
Condition: New
Color: Black, Silver
Material: Alloy Steel
Process: Galvanizing
Package Size: 50*28*25cm/19.69*11.02*9.84 in
Gross Weight: 14.6kg/32.19 lbs
Net Weight: 13.87 kg/30.58 lbs
Key Features
Premium Material: It is mainly made of high-class alloy steel, with a galvanizing process, which is impact-resistant and scratch-resistant, with high durability and reliability, ensuring long-term use.
Outstanding Performance: It can accurately install the bushing in the designated position, ensuring the correct alignment and installation accuracy of the bushing. This enables the bushing to function properly during use and improves the performance of the suspension system, saving installation time and labor costs.
Removal of Bushing:
- Scribe the bushing orientation on the beam tube and compression tube.
- The spring pins are not required to line up with the bushing holes during removal.
- Tighten retaining nuts to remove slack. Thread on the hammer adapter in the event the bushing becomes seized. Hook up the hydraulics and begin the removal operation.
- After each 2-inch stroke, re-tighten nuts to take up slack. (Most bushings will require 3-4 adjustments)
Installation of Bushing:
- Lubricate the bushing and insert the bushing into the compression cylinder.
- Place the plunger on top of the bushing, align the mark on the bushing with the mark on the plunger. The 4 corresponding pins to the bushing type you are installing should seat into the bushing.
- Tighten retaining nuts to remove slack. Thread on the hammer adapter in the event the bushing becomes seized. Confirm the plunger is aligned with the scribed mark on the beam tube and the pins are still engaged in the bushing. Hook up the hydraulics and begin the installation operation.
- After each 2-inch stroke, retighten nuts to take up slack. (Most bushings will require 3-4 adjustments). Ensure that threads on the tool are well lubricated before and during use to avoid damaging threads.
Highlights
Brand New, With Premium Material
Easy Installation
Complete Kit
Good Compatibility
Smooth Surface
Fine Workmanship
Sturdy and Durable
Notes
- Please confirm whether the product is suitable for your vehicle model before purchasing.
- Please ensure that threads on the tool are well lubricated before and during use to avoid damaging threads.
- Please note that this product does not come with lubricating oil.
- Please allow for slight color differences caused by shooting light and errors caused by manual measurement, and make sure you don't mind before ordering. If you have any questions, please contact us, and we will reply and solve your problem as soon as possible.
Fits (As a Reference)
Direct Replacement:
For Hendrickson S21307 S-21307
Cross References:
- For Hendrickson S-21307
- For Meritor R309575
- For Sirco SH2034
- For Tiger Tool 15040
- For BWP HE9AA-T
- For Dayton 334-936
- For Euclid E-9575
Applications:
- For Automann TS TRB5912
- For Dayton TS 334-1576
- For Euclid TS E-10729A
- For Flagg TS HT245
- For Gaff TS 13628
- For Hendrickson TS S-24691
OE/OEM Part Number: S21307
Package Included
1* Bushing Installation Tool
All Accessories for Assembly
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
On Jun 15, 2026 at 00:23:37 PDT, seller added the following information: