14.6V 10/20A  AC/DC Lithium Battery Charger Digital Display Current Adjustable for 12V Lithium Iron LiFePO4 Battery

Feature:
1.Real-time Current & Voltage Display: Displays charging current and charging voltage and allows you to check its charging condition. 

2.14.6V 10A/20A fast and slow charging can be activated.

3.Multi-protection: Overcharge protection, over discharge protection, over power protection, reverse connection protection, short circuit protection, excessive voltage charge-discharge protection, high temperature protection and excessive discharge current protection.

4.High Efficiency: The AC-to-DC charger charges 12V Lithium-ion phosphate (Lifepo4) batteries with high efficiency. It takes less than 90min to get the batteries fully charged.

5.LED Indicators: The charger’s indicator light illustrates the connected battery's operating mode and condition. Red light means that it is charging and green light reveals a full charge.

6.Low Noise: No annoying noise while it is working. It won't bother you.

7.Easy to Dissipate Heat: The built-in fan can effectively disperse heat to avoid damage caused by high temperature.

8.Sturdy and Durable: Its shell is an aluminum case, reliable and safe to use.

Specification:
Type: Lithium Battery Charger
Input Voltage: 180~240 Vac 47/63Hz or 100~120 Vac 47/63Hz
Output charging voltage: 14.6V DC ± 0.2V
Output charging current: 20A ± 2A
Fast charging current: 20A ± 1A
Slow charging current: 10A ± 1A
Size: 213*95*55mm
Efficiency: >88%
MTBF: 50000 hours
Protect characteristics
1. Short circuit protection
2. Over-current protection
3. Over-voltage protection
4. Reverse polarity protection
5. Over-temperature protection (when the internal temperature > 88 , it will automatically turn off; When the temperature is < 80 , it will automatically turn on.)

Note:
1.NEVER turn on before connect lithium battery positive and negative correctly!
2.NEVER short circuit between this charger's positive and negative!

Packing List:
1 * AC/DC Lithium Battery Charger 
1 * Battery Clamp

Lithium AC/DC 14.6V 10AMP Charger For Lithium Iron Phosphate(LiFePO4)Battery

Feature:
1.Designed for Lifepo4 Batteries: The 10A AC-to-DC Charger is intended for 12V Lithium-iron phosphate (Lifepo4) batteries. It includes 12AWG alligator clips and outputs power based on the battery's power, voltage and current condition. Its status indicator light reveals the connected battery's operating mode and condition. The portable LFP charger automatically monitors and maintains the battery at full charge.
 
2.Over-charging Avoidance: Lithium-iron phosphate (Lifepo4) batteries chargers are based on a CV/CC (constant voltage/constant current) charge algorithm. The charger limits the amount of current to a preset level until the battery reaches a preset voltage level. The current then reduces as the battery becomes fully charged. This system allows fast charging without the risk of over-charging.
 
3.Good for Battery: Using a charger with a specific Lithium charge algorithm is the best option for maximum performance and lifespan of any Lithium-iron phosphate (Lifepo4) battery. Using any other charger may damage the Lithium-iron phosphate (Lifepo4) battery.

Specification:
Type: Lithium Battery Charger
Input: 220–240VAC, 50–60Hz
Output: 14.6V 10A

Packing List:
1 * 10A Charger for Lithium-iron phosphate (Lifepo4) battery

12-18V Safe Fast Charger for RYOBI One

12-18V Safe Fast Charger for RYOBI One + P100 P101 P102 P103 P104 P105 P106 P107 P108 Lithium-Ion & Ni-Cd MIMH Batteries

Feature:
1.Full Compatibility: It is compatible with RYOBI One + P100, P101, P102, P103, P104, P105, P106, P107 and P108.
2.Cooling Channel: Continuous heat dissipation increases the service life of the battery or charger.
3.Protection Function: It can protect itself when it is over-temperature or over-voltage or when short circuit develops.

Specification:
Type: Charger
Model: P117
Input Voltage: 100V--240V
Output Voltage: 12V--18V
Output Current: 3A (Lithium-ion Battery) / 2A (Ni-Cd MIMH Battery)
Plug: Australia
Color: Yellow
Compatible Model: RYOBI ONE + P100 P101 P102 P103 P104 P105 P106 P107 P108

Note:
To reduce the risk of fire or burns, do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.

Package Included:
1 * Charger
1 * Power Cord