Here is a new sealed in its box a Darkwing Duck.  There are some little tiny areas of wear on the edges and corners. There is a mark on the back side along with a surface type of crease at the upper right hand corner area of about 5 1/2". There is a surface type of cut of about 5" on the one flap side with only the edge being cut through to about 1/4" from left to right.  Also in that area, the same type of surface cut goes from the top towards the bottom.  Seems like it might have happened when a worker opening the bigger box with all the toys in it with a box cutter?  All the taped areas on the ends are factory taped.  I took photos of the box in every angle!