Features:
-Enhanced Beam Pattern：1:1 same halogens’ light filament and adjustable beam for the 9012 LED light. Easily fit into the housing and aim the luminous direction for a perfect light beam pattern. No dark spots, no glare to drivers and passerby. Safer driving
-6000K White, 700% Brightner：AUXITO LED light bulbs are designed with led chips, 6000K soft light, up to 100W 20,000lm per pair, about 7 times brighter than stock halogen bulbs allowing you to see wider and and farther on the road, improving nighttime visibility
-Perfect Beam, No Dark Spots：The 0.03 inch ultra-thin base board makes AUXITO LED bulb closer to the light-emitting area of the halogen bulbs, ensuring 360° lighting without black spots. No glare to oncoming vehicles and drivers, making it safer to drive at night
-Compact Design, ：AUXITO LED light features an all-in-one compact design, built-in driver and fan take up less housing space, almost the same design as original halogen bulbs which makes it , just plug and play
-Triple Cooling Design, Long Lifespan：These LED bulbs are designed with full body aluminum material, built-in 12,000RPM high-speed cooling fan and copper base board, which can effectively take away the heat of the LED chip, ensuring a lifespan of up to 50,000 hours
-Canbus Ready, No Worries：AUXITO LED bulb fits for 98% vehicle's computer system without error or flickers, but some sensitive models may require canbus decoder. Please check the part number on your original bulbs, owner's manual or amazon fitment before ordering
Specifications:
- Compatible With: 9012
- Condition: 100%Brand New/ Never Used
- Lifespan:>50000hr
- Lumens: 20000LM Total
- Voltage:9-30V
- Color: 6000K(White Color)
- Interchange Part Number: Use for Headlight high Beam, Low Beam, DRL or Fog Lights…
- Beam Light Angle: 360 Degrees
- Placement on Vehicle: Left, Right, Front
- Heat Control: Aluminum shell base including Turbo cool fan
- Warranty: Yes
- Complete Kit: No Other Ballast/Driver Required Just Plug and Play - Newest Technology
- Beam Angel: 360 Degrees
- Operating TemperatureWith or without fan: -40°C ~ +80°C
- With or without fan:with fan
- Sealing way: SMD
- Body color: Smoke
Universal Fit For Brand
- For SUV,Bus,Off-road,ATV,Wagon,UTB,UTV,Forklift,Tractor
- For Ford Falcon/Ranger/Territory/Focus/Mustang
- For Toyota Hilux/Land Cruiser/ RAV 4/Corolla/Camry/Prado/Kluger
- For Holden Commodore/Colorado/Cruze/Barina
- For Isuzu D-MAX/MU-X,Jeep Grand Cherokee,MG (AUS) TF
- For Mazda 3/BT-50/CX-5,Mitsubishi Lancer/ Outlander/Pajero
- For Hyundai Elantia,Honda Civic/Accord/CR-V,Nissan Navara/Patrol
Package include:
2x LED Headlight Bulbs ( Built-in Driver Ballast )
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
CANBUS ERROR FREE: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor to avoid hyper flash or fast blinking.
Important Note:
1. Please check the LED light base type and size of your vehicle to confirm if the item will fit it.
2. As a safety precaution, make sure the car has had time to cool down properly before starting the installation process.
3. Make sure the ignition turned off and the keys removed.
4. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
5. If can-bus wiring system show signs of problems warning error on the dash board: bulbs failure,flickering, customers may require one warning/error canceling load resistor/decoder to bypass the error message.
6. These car models may cause the error issue, like BMW, Benz, Audi, and some European cars.
7. By the way, the error decoder can not 100% solve error warning problem. If you the problem, please contact with our customer service.
----------------------------------------------------------------------------------------------------------------------------------------------------
Why choose us
→Cost-effective price
We purchase raw materials in large quantities to ensure low costs, so we can achieve higher quality at the same price.
→Easy to Install
Our products have undergone many trials and adjustments, and have a design and guidance method that is more conducive to installation.
→Perfect customer service
24-hour online customer service to answer a series of questions about products, models, quality, prices, etc.
→Fast logistics delivery
No matter where you are in Australia, we will send the goods within 1 day, and you will receive your package within 2-7 days
→Thank you for your support，We have a little surprise for you
If your birthday is coming soon, provide proof of birthday to receive an exclusive birthday discount
If you have any questions, please feel free to contact us at any time
