|
Engineered for the long road.
Four reasons our precut PPF outperforms generic kits.
|
01
OEM 1:1 Fit
Digitally cut from factory geometry — zero trimming.
|
02
8.5 mil TPU
4-layer construction, ~30% thicker than standard film.
|
03
Self-Healing
Minor scratches vanish with sun, heat, or warm water.
|
04
Crystal Clear
Optical-grade clarity preserves your factory paint look.
|
|
8.5 mil
PREMIUM THICKNESS
|
10 yr
REAL-WORLD LIFESPAN
|
~30 min
DIY INSTALL TIME
|
Engineered to professional standards.
Every RAVOOY kit is manufactured in a quality-controlled facility using the same TPU film grade installed by professional auto detailing shops — delivered direct, without the $800 install bill.
|
Vehicle-Specific Cuts
Digital geometry traced from OEM data — not generic templates.
|
Premium Material Grade
Same 8.5 mil TPU spec used by professional detailing shops.
|
50+ Vehicle Models
Patterns available for many North American vehicles.
|
Fits the Following Vehicles
Please confirm your trim & model year before purchase.
| Make & Model / Trim | Year Range |
| Ford GT Base Coupe | 2005–2007 |
Cut to fit. Engineered to last.
Every kit contains 3 vehicle-specific TPU pieces, digitally precut from OEM geometry for the Ford GT 2005–2007. The pattern below shows the exact film shape that lands on your car — no trimming, no guesswork.
|
03
PIECES INCLUDED
|
|
MATERIAL
Premium TPU
|
THICKNESS
8.5 mil
|
FITMENT
OEM 1:1
|
INSTALL
~30 min DIY
|
8.5 mil TPU Film Structure
4-layer construction engineered for daily paint protection.
Thickness Comparison
6.5 mil vs 7.5 mil vs 8.5 mil — we chose the strongest spec on purpose.
Regular PPF vs RAVOOY 8.5 mil Premium
Same install effort, dramatically better long-term performance.
Pre-Weeded. Ready to Peel.
Most precut kits ship with the scrap film still attached around each piece — you spend 20+ minutes peeling waste before you can even start installing. RAVOOY removes the scrap at the factory.
|
✓ RAVOOY
Scrap Removed
✓ Pre-weeded — zero peeling waste
✓ Pieces are squeegee-ready out of the box ✓ ~30 minute total install time ✓ Clean factory edges — no accidental tears ✓ No risk of scratching adjacent pieces |
✗ OTHER SELLERS
Scrap Attached
✗ Scrap film still attached around each piece
✗ Manual weeding before you can install ✗ 60+ minutes total install time ✗ Risk of pulling film with the scrap ✗ Sticky residue from torn scrap edges |
Minor Scratches Disappear with Heat
Sun, hot water, or a hair dryer — the film resets itself.
Water Beads Off Instantly
Less spotting, faster wash time, cleaner finish year-round.
Installation Tools Included
No separate kit to buy — ready to install the moment it arrives.
Three Steps from Cart to Driveway
|
STEP 01
Check Your Vehicle
Confirm your Year, Make, Model and Trim against the fitment table above.
|
STEP 02
Click “Buy It Now”
Add to cart and check out through eBay — full Buyer Protection included.
|
STEP 03
Message Vehicle Info
Send us Year · Make · Model · Trim. We cut and ship within 24 hours.
|
|
Answers, Before You Ask
|
Q·01
|
Will this kit fit my exact trim?
Yes — the kit fits all Ford GT trims listed in the fitment table above
(Base Coupe).
Rocker Panel Kit fitment is matched to the trims listed above.
|
|
Q·02
|
How long does the film last?
Up to 10 years in real-world conditions. Our 8.5 mil TPU uses UV inhibitors and a hydrophobic
top coat to resist yellowing and chemical staining. Backed by a 5-year limited warranty.
|
|
Q·03
|
Can I install it myself?
Yes. The kit ships pre-weeded with squeegee, microfiber towel, spray pouch and install tool included.
Most DIY users finish in 20–40 minutes. Plenty of online tutorials cover the wet-install technique.
|
|
Q·04
|
Will it damage my paint when removed?
No. The pressure-sensitive adhesive releases cleanly with mild heat (hair dryer or heat gun on low)
and leaves no residue on factory clear coat in normal use.
|
|
Q·05
|
Does it work in cold or hot weather?
Operating range is −40°F to 200°F. For best install results, apply at 60–80°F
in a shaded, dust-free area. Self-healing activates around 100°F+ —
sunlight, hot water, or a hair dryer all work.
|
|
Q·06
|
What if a piece doesn’t fit?
We’ll replace it free — no questions asked. Send a message with photos within 30 days
of delivery and we’ll cut and ship a replacement set immediately.
|
