|
The TRIRON-N series controllers are modular-designed products based on nine MPPT solar controller models. The main unit (Power Module) is a solar controller which can be integrated with different display and interface modules to meet a variety of functional requirements. Among them, the master and slave interface module can synchronize and view the controller and inverter operating data on the LCD.
Optimizing the MPPT control algorithm further to ensure minimum power point loss rate and loss time, and quickly track the maximum power point to obtain the maximum solar energy of PV array in any environment. Meanwhile,TRIRON controller adds automatic limit function of charging power and current, so that the controller would not be damaged even connecting oversized PV modules (the
actual working value would not be higher than rated value).
The controller adopts the three-stage charging mode, and has perfect electronic protection function, which can effectively extend the battery life, improve the system performance, and ensure the system safety, stability and long-term operation. TRIRION controller can be widely used in RV, telecommunication base station, household system,field monitoring, etc.
|
|
Product Features
Self-identifying, load the driver for each module
Support the hot swapping function(only for same model)
Advanced MPPT control algorithm to minimize the MPP loss rate and loss time
Modular design, varied combination to meet different requirements
Ultra-fast tracking speed, and high tracking efficiency ≥99.5%
Accurately tracking and recognizing of multiple MPP
Peak conversion efficiency of 98%
Auto limit function of charging power and charging current
Compatible with lead-acid batteries and lithium batteries
Wide MPP operating voltage range
Full load operation during the working temperature range
Auto reduce power function when charging in high temperature
Battery temperature compensation
Real-time power statistics recording function
Multiple LCD and LED display modules optional
Master-slave interface module design,simultaneously view the controller and inverter operating data
Dry contact design, remotely switch on/off external equipment
Dual USB design, supply DC power for electronic equipment
Perfect electronic protection function
|
|
|
Protection function
|
PV over current protection PV short circuit protection Lithium battery low temperature protection
Night reverse charging protection Battery reverse polarity protection PV reverse polarity protection
Battery over discharge protection Battery over heat protection Battery over voltage protection
Load short circuit protection Load overload protection Controller overheating protection
|
|
|
Electrical parameters
|
|
|
Model
|
TRIRON 1210N
|
TRIRON 2210N
|
TRIRON 3210N
|
TRIRON 4210N
|
|
Nominal system voltage
|
12/24VDC auto work
|
|
Rated charge current
|
10A
|
20A
|
30A
|
40A
|
|
Rated discharge current
|
10A
|
20A
|
30A
|
40A
|
|
Battery input voltage range
|
8～32V
|
|
Max. PV open circuit voltage
|
TRIRON**10N : 100Vat Min operating environment temp; 92Vat 25℃environment temp
TRIRON**15N :100Vat Min operating environment temp; 138Vat 25℃environment temp
|
|
MPP voltage range
|
TRIRON**10N : (Vbat+2V)～72V
TRIRON**15N : (Vbat+2V)～92V
|
|
Max.PV input power
|
130W/12V
260W/24V
|
260W/12V
520W/24V
|
390W/12V
780W/24V
|
520W/12V
1040W/24V
|
|
Battery type
|
Sealed / Gel / Flooded;LiFePO4 / Li-NiCoMn / User
|
|
Lithium battery(LiFePO4 /Li-NiCoMn/User)
|
|
◆ Lead-acid batteries
|
Equalize charging voltage
|
Sealed: 14.6V, Flooded: 14.8V,
User-defined: 9~17V
|
|
Boost charging voltage
|
Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V,
User-defined: 9~17V
|
|
Float charging voltage
|
Gel /Sealed /Flooded: 13.8V,
User-defined: 9~17V
|
|
Low voltage reconnect voltage
|
Gel /Sealed /Flooded: 12.6V,
User-defined: 9~17V
|
|
Low voltage disconnect voltage
|
Gel /Sealed /Flooded: 11.1V,
User-defined: 9~17V
|
|
◆ Li-battery
|
Boost charging voltage
|
LiFePO4:14.4V；Li-NiCoMn：12.4V；
User:9-17V
|
|
Float charging voltage
|
LiFePO4: 13.6V；Li-NiCoMn：11.8V；
User:9-17V
|
|
Low voltage reconnect voltage
|
LiFePO4:12.4V；Li-NiCoMn：10.40V；
User:9-17V
|
|
Low voltage disconnect voltage
|
LiFePO4:11.0V；Li-NiCoMn：9.20V；
User:9-17V
|
|
Lithium battery
|
LiFePO4（4S；8S）/Li-NiCoMn（3S；6S）
|
|
Self-consumption
|
≤14mA(12V)
≤15mA(24V)
|
● Controller can not auto recognize system voltage when battery type is "lithium battery“, please confirm the
system voltage before use.
※ Without equalize charging when the battery type is "lithium battery".
◆ Technical data for 12V system at 25 ℃, twice in 24V system.
|
Discharge circuit pressure drop
|
≤0.18V
|
|
Temp. compensation
|
-3mV/℃/2V (Lithium battery has no Temp. compensation)
|
|
Grounding
|
Common negative
|
|
RS485 communication interface
|
5VDC/100mA
|
|
USB interface
|
5VDC/2.2A(total)
|
|
Relay interface
|
30VDC/1A
|
|
LCD backlight time
|
60s(default)
|
※The Temp. compensation coefficient is 0 When the battery type is "lithium battery“ and can not be changed
|
|
Environment parameters
|
|
|
Working environment temperature
|
-25℃～+55℃（with LCD）
-30℃～+55℃（without LCD）
|
|
Storage temperature range
|
-30℃～+70℃
|
|
Humidity range
|
≤95%,(N.C)
|
|
Enclosure
|
IP30
|
※ In the working environment temperature range ,Controller can be full load operation .
|
|
Mechanical parameters
|
|
|
Model
|
TRIRON1210N
|
TRIRON2210N
|
TRIRON3210N
|
TRIRON4210N
|
|
Dimension
|
135×180.8×47.3mm
|
150×216×56.7mm
|
158×238.3×62.7mm
|
183×256.8×66.7mm
|
|
Terminals
|
12AWG(4mm²)
|
6AWG(16mm²)
|
6AWG(16mm²)
|
6AWG(16mm²)
|
|
Net weight
|
0.56kg
|
0.92kg
|
1.35kg
|
2.06kg
|
|
|
Accessories (optional)
|
[Quality Guarantee]
Our products have a service life of more than 5 years. No matter what problems you encounter in the process of purchase or use, our strong after-sales service team will serve you wholeheartedly. Feel free to contact by eBay message.
[Usage Note]
Please read the instruction manual carefully or consult customer service to avoid damage to the new controller due to improper operation. The flooded battery must be place in a well ventilated space to avoid any possible danger or explosion. And please make sure that the positive and negative terminals of each component are wired correctly.
Specification:
Triron2210N:
Rated charge and discharge current: 20A
Max. PV input power:260W/12V, 520W/24V (12V/24V Auto Work)
Suitable battery types: Sealed /GEL/AGM/Flooded / lithium-ion
Battery voltage range: 8V~32V
Max. PV open circuit voltage: 100VDC
Terminal: 6AWG(16mm2 )
Recommended cable:10AWG(6mm2)
Triron3210N:
Rated charge and discharge current: :30A
Max. PV input power: 390W/12V, 780W/24V (12V/24V Auto Work)
Suitable battery types: Sealed /GEL/AGM/Flooded / lithium-ion
Battery voltage range: 8V~32V
Max. PV open circuit voltage: 100VDC
Terminal: 6AWG(16mm2 )
Recommended cable:8AWG(10mm2)
Triron4210N:
Rated charge and discharge current: 40A
Max. PV input power: 520W/12V, 1040W/24V (12V/24V Auto Work)
Battery voltage range: 8V~32V
Max. PV open circuit voltage: 100VDC
Terminal: 6AWG(16mm2 )
Recommended cable:6AWG(16mm2)
-
-
|
|
