The standard operational architecture for this hybrid sensor class includes:
Sensing Principle: Photoelectric retroreflective with a polarized dual-lens system. Polarizing filters prevent false trips caused by highly reflective, shiny surfaces (like shrink-wrap or stainless steel).
Sensing Range: Up to a maximum of 6.5 meters (21.3 feet) when aimed at a standard PL80A reflector.
Light Source: High-visibility red PinPoint LED (631 nm wavelength), creating a sharp, tight light spot for effortless physical alignment.
Supply Voltage: 10 V DC to 30 V DC.
Output Configuration:PNP digital output operating in "Light On" (Q1) mode.
Connection Interface: Standard 4-pin M8 male quick-disconnect connector.
Housing & Durability: Built from proprietary SICK VISTAL™ plastic housing, which is roughly 9 times stronger than standard ABS. It features structural IP67 and IP69K environmental ingress protection, allowing it to withstand high-pressure, high-temperature washdowns.
Pinout Wiring Diagram (M8, 4-Pin)
When replacing or testing this sensor with a standard M8 single-ended cable (such as a Banner MQDC series or equivalent), follow this universal industrial wiring convention:
Pin Number
Wire Color
Function / Connection
Pin 1
Brown
+V DC (10–30 V DC Power Supply)
Pin 2
White
Not Connected (or secondary signaling depending on downstream configuration)
Pin 3
Blue
0 V (DC Ground / Common)
Pin
Thanks for shopping my ebay store!
Check out my other auctions by clicking SELLER'S OTHER ITEMS below bad_habit_liquidation! 4