[120
Bar/1700 PSI High Pressure Washer] This cordless pressure washer
features a high-performance brushless pure copper motor with a
maximum pressure of 120 Bar and a spray rate of 6L/min, making it
quick to remove even the toughest stains. It's suitable for cleaning
vehicles, driveways, walls, floors, pools, windows, and pet showers.
[6-in-1 Multi-Function Nozzle] This cordless pressure washer
features six nozzle modes (0° direct, 15°, 25°, 40°, 0° shower, and
mist) to meet all your outdoor cleaning needs. It can be used for
watering plants, cleaning walls, floors, bathrooms, driveways,
fences, and hard-to-reach corners around your home and yard.
[Easy Water Access] This cordless pressure washer comes with
a 197-inch hose and filter basket. It effectively filters impurities
and particles from the water, providing enhanced protection for the
cordless pressure washer and eliminating the worry of clogged pipes.
It also includes a connection port for easily drawing water from
rivers, lakes, or drinking water bottles, even without a faucet.
Accessing water is easy, even in winter or outdoors. [Durable 3.0AH
Lithium Battery] Weighing approximately 2 kg, the device is equipped
with a high-capacity 3.0Ah battery, allowing you to clean anytime,
anywhere without the shackles of wires. Depending on the water
pressure, a single charge lasts approximately 30-45 minutes. Whether
cleaning your car or bike while traveling or rinsing your boots
after a hike, this high-pressure washer provides a powerful and
portable cleaning experience.
[Wide Application] This high-pressure washer is ideal for a
variety of cleaning tasks around the home and garden. This compact
yet powerful pressure washer will get the job done, whether you're
cleaning your car, patio, or walls.
Specifications:
Motor:
Brushless Motor
Color: Yellow + Black
Battery Capacity: 3.0Ah
Voltage: 21V
Type: 2 Batteries
Pressure: 120 Bar/1700 PSI
Flow Rate: 6 L/min
Hose Length: 5 m/16.5 ft
Speed: 40,000 rpm
Maximum Spray Distance: 12 m
Spray Nozzles: 0°, 15°, 25°, 40°, Spray Mode, Foam Mode
Charging Time: 3-4 hours
Usage Time: 30 minutes
A. Why doesn't water flow when I press the trigger?
1. Check if the lithium battery is dead. If so, recharge it with a
charger.
2. Check that the motor is functioning properly. After turning on
the power, the motor should emit a steady humming sound, indicating
no problems. If it emits a high-pitched noise, the pump may be
faulty.
3. Water source impurities clog the water inlet filter: Water source
impurities clog the water inlet filter, and the nozzle becomes
clogged with calcium or particles, resulting in intermittent or no
water flow.
4. Bent or leaking water pipes: Bent or leaking water pipes prevent
the high-pressure water inlet or outlet from flowing properly,
causing the product to stop spraying.
5. Printhead malfunction: Improper installation or misalignment of
the printhead can cause the motor to rotate normally but not spray
water. Alternatively, the printhead may be accidentally bumped
during daily use, causing it to break, leak, and become inoperable.
6. Press and hold the trigger for at least 10 seconds to allow water
to be drawn into the unit.
7. If the pump has not been used for a long time and there is no
water stored in it, causing difficulty drawing water, connect the
power cord and hold the trigger to simultaneously draw water into
the water inlet. Once the unit is flowing properly, connect the
water pipe to draw water.
B. How can I order additional batteries and chargers for this
product? Our body interface is compatible with Makita 18V batteries
such as the BL1830, BL1840, BL1850, and BL1860. The battery charger
uses a DC T-connector (for Makita Star Interface) with a diameter of
12mm.
C. How can I prevent water leaks?
When rotating to change spray modes, ensure that each accessory is
correctly connected according to the user manual and that the nozzle
arrow and mode symbol are in the same position.
D. Can it be connected to a faucet or garden hose?
Yes, but additional faucet or garden hose connectors are not
included. You will need to purchase an adjustable or size-specific
connector. When connected to a faucet, water may spray directly
without pressing the switch. This is normal due to the one-way valve
in the pump body.
E. Water is leaking from the machine and water pipes after
unpacking. Has it been used?
Please note that this product undergoes a rigorous water spray test
before shipment to ensure proper water flow. Therefore, a small
amount of moisture remaining inside the product is normal. Please
use with confidence.
F. The battery is not functioning properly or is draining quickly.
The battery was not activated or charged upon receipt, was stored
for an extended period without regular charging, or was charged with
a high current directly after depletion. This can cause polarization
of the battery cells and shorten the battery life. It is recommended
that the battery be charged even if it still has some charge.
Package Contents:
1 x main
unit
2 x batteries
1 x 5 m hose
1 x foam spray can
1 x charger
1 x 6-in-1 spray wand
1 x user manual
1 x hose quick connector
1 x water filter
|