The Conversol VM4 5.6kW off grid solar inverter charger is a powerful 48V pure sine wave inverter designed for solar battery systems, backup power, cabins, workshops, farms, remote homes and off grid installations.
This 4th generation Conversol inverter combines a 5600W inverter, high performance MPPT solar charger and AC battery charger in one compact unit. It supports up to 6000W of solar PV input and delivers a stable 230V AC pure sine wave output for reliable everyday power.
The inverter can be used with solar panels, batteries, generator input or grid input while operating as an off grid power system. It does not export power to the grid, making it suitable for independent energy systems and backup power applications.
The Conversol VM4 can operate without a battery when sufficient solar power is available. This gives users the option to start with a lower cost solar setup and add a 48V battery bank later for night-time use, backup power and improved stability.
This inverter supports BMS communication for compatible 48V lithium batteries, including Pylontech US5000, US3000C and US2000C. It can also be used with other compatible battery brands such as Leoch and Fogstar when correctly configured.
No. This is an off grid inverter charger and it does not export electricity to the grid. It is designed to supply connected loads from solar panels, batteries, generator input or AC input, depending on the selected operating mode.
No. As an off grid inverter, it does not require MCS approval or permission from the grid operator for export purposes. However, the system must still be installed safely by a competent person and in accordance with the relevant electrical wiring regulations.
This inverter must be installed by a competent person with suitable knowledge of AC and DC electrical systems. Incorrect installation can cause equipment damage, electric shock or fire risk. Always follow the inverter manual, battery instructions and correct wiring practices.
Voltacon provides UK-based technical support and can assist with general setup guidance, battery compatibility and wiring advice. The installer remains responsible for the final system design, installation and safety checks.
| Conversol VM 4 Off-Grid Inverter 5.6kVA | |
|---|---|
| Model | Conversol VM 4 5.6kVA / 5600W |
| Rated Power | 5600VA / 5600W |
| Input | |
| AC Voltage | 230 VAC |
| Selectable Voltage Range | 170 to 280 VAC for personal computers |
| Frequency Range | 50 Hz or 60 Hz auto sensing |
| Output | |
| AC Voltage Regulation | 230 VAC ± 5% |
| Surge Power | 11,200 VA |
| Peak Efficiency | 90% to 93% |
| Transfer Time | 15 ms PCs / 20 ms home appliances |
| Waveform | Pure sinewave |
| Battery | |
| Battery Voltage | 48 VDC |
| Float Charge Voltage | 54 VDC |
| Overcharge Protection | 63 VDC |
| Solar and AC Charger | |
| Maximum PV Array Power | 6000 W |
| MPPT Operating Range | 120 to 450 VDC |
| Max PV Open Circuit Voltage | 500 VDC |
| Maximum Solar Charge Current | 120 A |
| Maximum AC Charge Current | 100 A |
| Maximum Combined Charge Current | 120 A |
| Maximum Efficiency | 98% |
| Physical | |
| Dimensions D x W x H | 119 x 313.6 x 422 mm |
| Net Weight | 12 kg |
| Environment | |
| Humidity | 5% to 95% RH non condensing |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -15°C to +60°C |
Note: Specifications are subject to change without notice to improve performance.