Description:
1. CPE braided hose mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel.    Please notice that the service life might be shorter when it work with fuel.    This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect.
2. Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion.    Not recommended installation in corrosive environment, braided fuel line's service life will be influenced.    Outer nylon braided has excellent inflaming and safer to use.
-1The high pressure fuel line covered with high quality woven Nylon and 304 stainless steel braided + CPE synthetic rubber to enhance flexibility and give a cool racing appearance.
3. The braided fuel line can stand-104ºF to +302 ºF/-40ºC to +150ºC, 500 PSI Pressure Tolerance, the fuel line has good retardancy and excellent corrosion resistance.   Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
4.The 8an fuel line specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide.    but NOT FIT E85.
5.The highlight of this fuel line is its sublime pliability.    Steel, aluminum, or plastic lines will not bend as easily as this tube.    The superior bending ability of this fuel tube makes it easier to install.    It also results in more fluidity in transmission.
6.Polished and anodized for bright appearance and corrosion protection

Compatibility:
Brake Fluids, Unleaded Petrol, Methanol, Water, & Oil.   Ideal for use with Unleaded fuel.

How to install:
1.   Wrap masking tape over the area to cut to ensure a nice clean cut and prevent the braid from unraveling.
2.   Clean cut the hose and clean away debris.
3.   Clamp the fitting socket into the vise and insert the hose into the socket
4.   Apply lube to the connector
5.   Start hand threading the socket down onto the fitting.    Be careful not to strip the threads when starting.    Tighten the initial threads by hand being careful not to strip the threads when starting.
6.   Once the hose goes over nipple tighten using an adjustable wrench.

What You Get:
1PCS CPE Hose Line