Feature: 1. Brushless motor has low interference, compare to brushed motors, there will be no spark generated when motor is running, thus greatly reduce electric spark interference to remote radio equipment
2. Low noise, smooth operation, brushless motor has less friction force during operation, which is a great advantage for the stability of equipment operation
3. Long service life and low maintenance costs, brushless motor is mainly abrasion on the bearing, and only need to clean dust when necessary
4. Driver is compatible with motors that has or has no hall sensor, supports potentiometer speed control function, external 10V voltage speed control function, power on/off function, speed output function, alarm output function, CW/CCW function
5. Widely used in small appliances, electric tools, water pump, fan control system, etc
Specifications:
Brushless DC Motor:
Working Voltage: 48V DC
Power: 500W
Speed: 12000r/min
Torque: 0.6N.m
Insulation Resistance: >2MΩ
Dielectric Strength: 400V
Front & Back Cover Diameter: 5.7cm/2.2in
Middle Diameter: 5.5cm/2.1in
Chuck Length: 4.5cm/1.7in( bar part, including nut and )
Chuck Diameter: 2cm/0.8in
Motor Overall Length: 19.4cm/7.6in (including fan, chuck and motor)
Spindle Radial Run-out: About 0.01-0.03
Motor Driver(WS55-220):
|
Voltage
|
24-50VDC
|
|
Rated Current
|
12A
|
|
Current Limiting
|
About 14A
|
|
Max. Supporting Speed
|
20000RPM
|
|
Speed Control
|
1, Connect to external potentiometer;
2, Connect to external 10VDC voltage.
|
|
Speed Output
|
PG signal(there is a 5V speed pulse output
between this port and earth). If output frequency is P(Hz), motor pole number
is N, speed is F(RPM), then output speed frequency, P=F*N/60
|
|
Alarm Output
|
ALM signal, there is alarm pulse output
between this port and earth
1.This port outputs 5V
high level when normal working;
2. When it is powered on, but speed control signal is quite low and
motor does not rotate, port signal is low level; that is to say, when EN
button is open, as long as motor does not rotate, alarm port signal is low
level, indicating the state is abnormal and need to be dealt with;
3. When it is under-voltage, over-voltage, stall, lacking phase or phase
short circuit, port signal is low level.
|
|
CW/CCW
|
F/R, external switch connects to F/R port at
one end, and to earth at the other end; motor's rotating direction can be
changed.
|
|
Start/Stop
|
En button, external switch connects to EN
port at one end, and to earth at the other end; motor starts when connect to
earth.
|
|
Stall Protection
|
Motor stops working when stalled, and starts
when powered on again
|
|
Power Light
|
Green light on when powered on
|
|
Indicator Light
|
Red light flashes once at intervals when EN
power on, potentiometer or external voltage not power on;
Red light flashes seven times at intervals when EN not power on and on
stand-by state.
|
|
Insulation Resistance
|
>100MΩ(normal temperature and pressure)
|
|
Dielectric Strength
|
0.5KV, 1min(normal temperature and pressure)
|
Package Includes:
1 x Brushless Motor
1 x Motor Driver
1 x Clamp
1 x Potentiometer and Switch
Note:
1. Please allow small size error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution. 1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails. 2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area 3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. 
We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
|
