EVA floor is a very good choice for boat-building. It looks like teak, but it is more non-slip than teak. These products protect boats’ surfaces, preventing scratching and chipping. They also cover up surface imperfections, helping it look like new. If you want to prolong the life of your boat while enhancing its appearance, one of the primary things you’ll eventually consider is redoing the flooring. Our Eva floors are the ideal solution for those seeking a beautiful floor that looks high-end without the high price tag. And it's versatile enough to be used for yacht flooring, boat flooring, RV flooring, car flooring, swimming pool flooring, kayak flooring, garden flooring, pontoon carpet, surfboard deck pad, paddle board pad, SUP and other decoration.



Specifications
Material: EVA Foam 
Color: Light Gray + Red Lines
Strong self-adhesive glue at the back
Type: Bevel Stripes (Patented Design)
Net Product Weight: 2.05kg / 4.52lbs
Length: 94.5inch/7.87ft/240cm
Width: 35.4inch/2.95ft/90cm
Thickness: 0.22inch/0.018ft/0.55cm
(A deviation of 0.1cm is possible due to manual measurement)



Features
1.High-quality EVA(Ethylene-vinyl Acetate) environmental protection materials. 
2.With backing adhesive,very easy to install. Easy DIY cutting,everyone is a master.
3.UV protection, not easy to aging, not easy to fade, almost no maintenance.
4.Low heat transfer, making the deck temperature unaffected by harsh environments, making you more comfortable.
5.Closed cell structure, non-absorbent, moisture-proof, good water resistance.
6.Patented beveled design, CNC-like cutting, easy to clean than normal straight edges.
7.Not easy to slip.
8.Elastic, not easy deformation, there is no need to worry about deformation when stepping on it. This product has good resilience, but it should be noted that please do not press the product with heavy weights for a long time, which will affect the elasticity of the product. 
9.High tensile elongation, not easy to tear. Elongation and rebound will perform better than other materials.
10.High Density, not easy to damage. 
11.Odourless, non-toxic.
12.Stain resistant & very easy to maintain, can also be pressure washed. 
13.Resistant to seawater, grease, acid, alkali and other chemicals corrosion.
14.Perfectly decorate your boat.always shows your charming and highlight your boat.
15.This boat marine flooring mat is suitable for yacht flooring, pontoon pad, boat flooring, RV flooring, car flooring, swimming pool flooring, garden flooring, surfboard deck pad, paddle board pad, SUP and other decoration.



Installation requirements
1.Make sure the surface is clean and dry.It's better to fill in structural adhesive making the surface smooth,such as"Flex Seal".
2.Please doing a trial fitting before gluing down. Once you glue it you can't unglue it.Check whether the colors matched.
3.The product is rolled tightly for shipping. Don't tempting to unroll it and allow it to flatten out unless you start paving it, it will cause the EVA peel-off backing to separate from the adhesive and the adhesive will dry out.
4.The edges should be sealed with silicone rubber sealant (sikaflex) to prevent water and debris from getting underneath.



Tips
♥Because some pictures are shot indoors and some are shot outdoors, some are shot with warm light and some are shot with white light, meanwhile, the visual effect of each person's screen may not be the same, there will be a little color difference, but the difference is not very big, please kindly understand, thanks.
♥Specific Install instruction will be sent to you via eBay message after you make an order successfully.
♥Whether you have any questions before or after the sale, welcome to consult our customer service staff at any time, we will be accompanied by the whole process, do our best to solve your questions, to provide one-stop service from start to finish to your satisfaction.
Datacaciques