Note: it needs to be used with transformer to convert the voltage to 12V
Removable handles
Standard material
High quality plastic material and solid, Durable in use;Free movement,
Positioning the light to where you want.
The light for sensing lamps chairs
Technical Data
Spot size: 70mmx140mmx700mm
Lamp packing size: 40x32x14cm
Lamp Weight: 2kg
llluminance: 9000-33000Lux
Color temperature: 6000K
Power supply voltage: AC 12V±20%
power: 8W
High brightness professional E-Sensing LED dental light
|
|
|
|---|---|---|
APPLICATIONThe light is used in dental examinations, dental diagnostics, and dental procedures | HELPFUL FOR DENTAL WORKAdvantages: improving work efficiency greatly The handle can be used by your own angle habit, removable handles, easy to clean and easy to mount and dismount. | FINE WORKMANSHIPFine workmanship and good performance That help you keep your teeth cleaner |
View depth is big: can gain good luminance beam spot and luminance in the shining distance range.
Light 22mm Infrared
The light is soft, won't hurt your eyes, adopt CRI makes the shining face more realistic.
Light efficiency is higher: the illuminance can reach over 35000lux wh
Features:
-LED 6 bead sensor
-With a handle button, the handle can be removed for sterilization
-Strong light-gathering ability
-Strong and weak light
-Manually control the switch 2-wire connector for easy installation
Technical Parameters:
Power:8W
Input voltage: 12VAC±20﹪
Frequency: 50/60Hz
Lamp Weight: 2kg
Rated current: 800mA
Illumination: 8000－30000LUX
Color temperature: 6000°K
Spot size: 70×140MM (distance 700MM)
Control method: inductive switch and manual switch
Environmental Requirements:
Storage and transportation environment:
Temperature: -20℃- 70℃
Relative humidity: 10﹪－90﹪
Use Environment:
Temperature: 5 ℃ -40 ℃
Relative humidity: 30﹪－80﹪
Atmospheric pressure: 500-1060hpa
Operation and Control:
1. The operating lamp has three movable joints to adjust the angle of use
2. The handle of the dental lamp can change the angle according to user's requirements
3. When you approach the sensor by hand to about 50-120MM, you can control the dental lamp to turn on or off.
Cleaning and Disinfection:
The translucent cover of the dental lamp can be wiped with the lens paper.
The housing and handle of the dental lamp can be cleaned with a neutral cleaning solution, wiped and disinfected with alcohol or disinfectant.
Installation Method:
Connect the dental lamp connection plug and the lamp arm connection plug, and then tighten the dental lamp and the lamp arm with M6 screws, and then connect the lamp arm connection to the AC12V power supply of the dental chair control board.
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and
state and local regulatory agencies. If the item is subject to FDA regulation,
I will verify your status as an authorized purchaser of this item before shipping of the item.
If you have questions about legal obligations regarding sales of medical devices,
you should consult with the FDA's Center for Devices and Radiological Health:
https://www.fda.gov/cdrh/devadvice/
https://www.fda.gov/cdrh/industry/support/index.html
Thank you for your cooperation.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
