|
|
|
|
|
|
|
|
Fits Applications:
2015-2018 For Nissan Altima 3.5L Front Driver Side CV Axle Assembly
2016-2020 For Nissan Maxima 3.5L Front Driver Side CV Axle Assembly
What Are The Signs Of a Failing CV Axle?
You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.
The steps and tools needed for an CV axle replacement
This is a challenging and technical project
Tool List
Jack
Jack stands
Automotive tool set (pliers, screwdrivers, sockets)
Pry bar
Lubricant
Brake Cleaner
Hammer or mallet
Impact wrench (optional)
CV axle replacement
Pro Tip
Additional specialized tools such as tie-rod end pullers, ball joint removers, and vehicle-specific sockets may be required
1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions.
Tip: Leave one side assembled while you work on the other so you can remember how things go back together.
2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue.
3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose.
4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly.
5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals.
6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way.
7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.
Noticed
-Instruction is not included. Professional installation is recommended
-Accessories: You will get exactly showing in the picture
-Please confirm your original part number before purchasing
-Please contact us for anything we can help you with
| Item Specifics | |
|---|---|
| Manufacturer Part Number | MA17582301X |
| Brand | Maxleve-autopart |
| Placement on Vehicle | Front Left |
| Fitment Type | Direct Replacement |
| Type | CV Axle Assembly |
| Quantity | 1 |
| Surface Finish | Painted |
| Non-Domestic Product | No |
| Superseded Part Number | NCV53136 |
| OE/OEM Part Number | 66-6450 |
| Fitment 1 | For Nissan Altima |
| Fitment 2 | For Nissan Maxima |
| Colour | Black |
| Weight | 18L |
| Bundle Listing | No |
| Manufacturer Warranty | 1 Year |
| Material | steel |
| OE Spec or Performance/Custom | Performance/Custom |
| Modified Item | No |
| Input Shaft Connection Style | Spline |
| Number of Inboard Splines | 27 |
| Output Shaft Connection Style | Spline |
| Number of Outboard Splines | 25 |
| Universal Fitment | NO |
| Note | Verify this part fits your vehicle |
| Axle Nut Locking Type | Standard |
| Axle Nut Locking Type | Self Lock |
| Spindle Nut Included | Yes |
| Spindle Nut Thread Size | M24x2.0 |
Thank you for your support so much.
We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
We offer a 30 days Free Return
We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!
WARNING: Please confirm compatibility again
Shop Category Best Sales
Delivery
Newly Listed
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
CV Axle Assembly For Nissan Altima 3.5L 2015 2016 2017 2018 Front Left
Fits Applications: 2015-2018 For Nissan Altima 3.5L Front Driver Side CV Axle Assembly
What Are The Signs Of a Failing CV Axle? You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.
The steps and tools needed for an CV axle replacement This is a challenging and technical project Tool List Jack Jack stands Automotive tool set (pliers, screwdrivers, sockets) Pry bar Lubricant Brake Cleaner Hammer or mallet Impact wrench (optional) CV axle replacement Pro Tip 1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions. Tip: Leave one side assembled while you work on the other so you can remember how things go back together. 2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue. 3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose. 4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly. 5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals. 6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way. 7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.
Noticed -Instruction is not included. Professional installation is recommended -Accessories: You will get exactly showing in the picture -Please confirm your original part number before purchasing -Please contact us for anything we can help you with Thank you for your support so much. We do not ship to P.O. Boxes, APO/FPO or Military Mail Box. We offer a 30 days Free Return We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration! WARNING: Please confirm compatibility again All right reserved. |
