2Pcs L+R Genuine Kia Rear Tailgate Power Lift Support For Sorento 2016-2020
1. electric liftgate actuators are through completely technology upgrade. The motor runs smoothly, reducing shock and making low noise.
2. OE Qualify Guaranteed, Product has a 5-year service life.
3. Direct-fit replacement ensures proper fit, form, and function.
4. Plug and play design ensures ease of installation.
5. Designed to meet Federal Safety Standards.
Fit：
2020 Kia Sorento EX, L, LX, S, SX 2.4L L4 - Gas, 3.3L V6 - Gas
2019 Kia Sorento EX, L, LX, S, SX, SX Limited 2.4L L4 - Gas, 3.3L V6 - Gas
2018 Kia Sorento EX, L, LX, SX, SX Limited 2.0L L4 - Gas, 2.4L L4 - Gas, 3.3L V6 - Gas
2017 Kia Sorento EX, L, LX, Limited, SX, SX Limited 2.0L L4 - Gas, 2.4L L4 - Gas, 3.3L V6 - Gas
2016 Kia Sorento EX, L, LX, Limited, SX, SX Limited 2.0L L4 - Gas, 2.4L L4 - Gas, 3.3L V6 - Gas
2019 Kia Sorento EX, L, LX, S, SX, SX Limited 2.4L L4 - Gas, 3.3L V6 - Gas
2018 Kia Sorento EX, L, LX, SX, SX Limited 2.0L L4 - Gas, 2.4L L4 - Gas, 3.3L V6 - Gas
2017 Kia Sorento EX, L, LX, Limited, SX, SX Limited 2.0L L4 - Gas, 2.4L L4 - Gas, 3.3L V6 - Gas
2016 Kia Sorento EX, L, LX, Limited, SX, SX Limited 2.0L L4 - Gas, 2.4L L4 - Gas, 3.3L V6 - Gas
Part Number：81770-C5100, 81770C5100, 81770 C5100, LR061667
Parcel Content:
Set Of 2 Electric Power Tailgate（Left + Right Side ）
How to Properly Install a standard lift support？
1. Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.
2. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.
3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.
4. To install the new supports do the same procedure in reverse. DO NOT jam the new support end over the ball socket without lifting the U band slightly or damage may occur.
5. Lift Supports need to be installed fully extended. In most cases you just can't compress them unless they are on the vehicle. If you have any issues during the installation PLEASE contact us. Never force a support.
1. Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.
2. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.
3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.
4. To install the new supports do the same procedure in reverse. DO NOT jam the new support end over the ball socket without lifting the U band slightly or damage may occur.
5. Lift Supports need to be installed fully extended. In most cases you just can't compress them unless they are on the vehicle. If you have any issues during the installation PLEASE contact us. Never force a support.
