Description:
1. This hand-held electric capping machine is mainly used for screwing and unscrewing of the screw cap. Easy to carry, this tool can be easily used to tighten or loosen the cap. The adjustable clutch(adjust strength) can effectively avoid the cap damage and reduce the wear inside the plug. Once the cap is fully tightened, the machine automatically stops rotating head that you can cap the next operation.
1. This hand-held electric capping machine is mainly used for screwing and unscrewing of the screw cap. Easy to carry, this tool can be easily used to tighten or loosen the cap. The adjustable clutch(adjust strength) can effectively avoid the cap damage and reduce the wear inside the plug. Once the cap is fully tightened, the machine automatically stops rotating head that you can cap the next operation.
2. It is suitable for all kinds of high strength bottle caps capping work, apply to the bottle cap direct range of 10-30 mm, single production capacity of up to 30-90 bottles / min (depending on proficiency).
Specification:
Power: 80W
Voltage: 220V/50Hz
Working Method: Electric Capping
Operate Type: Handheld
Cap diameter: 10-50 mm
Capping Speed: 30-90 bottles/min (Differs from people to people)
Dimension: 7 x 7 x 30 cm
Weight: 1 kg
Power: 80W
Voltage: 220V/50Hz
Working Method: Electric Capping
Operate Type: Handheld
Cap diameter: 10-50 mm
Capping Speed: 30-90 bottles/min (Differs from people to people)
Dimension: 7 x 7 x 30 cm
Weight: 1 kg
How to Use:
1. Put Chuck onto the Cap to be tightened
2. Push down switch to active the Capper
3. The Capper starts and tightens the cap
4. The Capper automatically shuts off while reaching the pre set torque
1. Put Chuck onto the Cap to be tightened
2. Push down switch to active the Capper
3. The Capper starts and tightens the cap
4. The Capper automatically shuts off while reaching the pre set torque
Package Included:
1 x Electric Bottle Capping Machine
2 x Aluminum Capping Head
4 x Silicone Rubber Rings (10-20mm;20-30mm;30-40mm;40-50mm)
1 x Wrench
1 x Electric Bottle Capping Machine
2 x Aluminum Capping Head
4 x Silicone Rubber Rings (10-20mm;20-30mm;30-40mm;40-50mm)
1 x Wrench